Hallo Again
i hope you still have paitence to help me. now i think we take one step at the time to find the problem,
Here is a link for the television.
https://www.philips.de/c-p/65PUS7502_12/7000-series-ultraflacher-4k-fernseher-powered-by-android-tvtm-mit-3-seitigem-ambilight-und-p5-perfect-picture-engine/technische-datenWe are talking about that the televison shows up at the buttom HDR Signal wenn i play the movie.
i have today check my harddrive. what do you say is my problem not there ?
and i have also make a write and read test " PLEASE SEE PICTURE"
it is only reading and writting with 130 mb/s
SEAGATE Skyhawk Surveillance 3 TB HDD »ST3000VX010«
Schnittstelle: SATA mit 6 Gbit/s
Datenübertragung: 180 (MB/s)
Garantie: 3 Jahre
Formfaktor: 3,5 Zoll
- test1.jpg (73.38 KiB) Viewed 18690 times
i have also look at the router to see if we have 100 Mbit/s or 1 Gbit/s
and i have found this.
android-xxxxxxxx
LAN 2 mit 100 Mbit/s
But from my PC to router i have 1 Gbit/s
Now i have also copy the demo to the C where i have 2x SSD in Raid but i get the same symtoms.
and they have a read around 928 mb/s and write around 400mb/s, please see picture.
- SSD.jpg (72 KiB) Viewed 18690 times
The movie i am testing is this,
http://4kmedia.org/lg-new-york-hdr-uhd-4k-demo/Serviio have i set to "xxx.xxx.xxx.xx Philips TV DMR Roku 4K TV"
no matter what for a demo i am trying to see i get always loading screen so around every 10 seconds, sometimes a little longer before loading,
and i am using VLC player
I have a Extern USB 3.0 harddrive and when i try to play over the televion with the USB menu, i get the same loading, but i am not sure if the
harddrive at to slow for HDR 4k.
- USB Disk.jpg (69.95 KiB) Viewed 18690 times
i was now thinking to buy a SSD and put into a USB 3.0 and look if that help. or is it just that the television dont like Serviio or the renders is now there because it is to new for this software ?