mediabrowser

I am trying to setup mediabrowser on a sagecom fast 5260 router and can't seem to figure out how to foward the ports on the router.
I have done this before but on different routers with different programs.
Thanks for your help in this

[DenyAll]

http://openmyip.com/Sagemcom-Fast-5260-router-setup

I am fuzzy when it asks for remote host in my router?
I entered 0.0.0.0

[atc98092]

I am fuzzy when it asks for remote host in my router?
I entered 0.0.0.0

Remote host is the IP address of the computer on the Internet that is permitted to use this forwarding rule. You are correct entering 0.0.0.0, as that is interpreted as any address.

i got the ports fixed canyouseeme sees it
over on serviio i entered where it says external address i tried the ip and clicked check conntivty and still gives error

using serviio pro 1.31.1 on win xp

i set static ip on serviio machine forgot to add that detail

i noticed in the log file the port listed is 23423
on this site http://serviio.org/component/content/ar ... diabrowser is lists port 23424

[atc98092]

Port 23423 is for the console, not MediaBrowser. 23424 is correct for the browser. Since the URL is different between the console and browser, that would explain if it wasn't working before.

ok so I had it set correctly
everything i enter into the external ip on serviio dont work
i can access it within my network but not outside it

[DenyAll]

The External Address field in Serviio Console isn't used by Serviio (it's used by other apps) so you can leave it blank.

Perhaps post a screen shot of your port forward page from your router. When testing ensure you are connected to an external network ie. don't try your external address from your home network, some providers don't allow that. Lastly ensure your external address is a public address and is not being natted by your provider.

screen shot of my ports

i had protcol set to tcp-udp but changed it to tcp

natted?? its been like 10years since i had to foward ports how do i find out if its been natted?

its working great thanks for all your help

right now I have it working but i want to change the url from www.ipaddress:23434/MediaBrowser/ to www.custom:23434/Mediabrowser/

url is masked this is so cool
thank you guys for your help
I also have figured out a way to send it to my Roku from pc
RokuCast

[atc98092]

natted?? its been like 10years since i had to foward ports how do i find out if its been natted?

I realize you have it working, but to answer this question: you can see your "public" IP address in your router information page. Then go to whatismyipaddress.com and see if it's the same number. If not, then your ISP has a firewall between you and the Internet, so NAT is enabled on their firewall. If that is ever the case, the only way you can have something visible from the Internet is to have your ISP add a port forwarding rule to their firewall just like you did to yours.

But since yours is working, that shouldn't be an issue.

ah yes yes
I see that never thought of what to call that till now
Thank you