Hello All,
I am runing Serviio v 0.6.2 on a
Windows 7 (64 bit) PC, using an
ASUS O!Play Air with firmware version 1.29P (
http://www.asus.com/Multimedia/Digital_ ... /OPlay_Air) - attached to an 15-year-old TV set via composite video/audio. Via WLAN. And it works...
Thank you!
Well, it works up to 95%... One or two things should be fixed. My O!Play Air is identified as an
"unrecognized device" and the
"generic DLNA profile" is used. This causes e.g. that FastForward isn't very fast (1,5x and 2x - that's it...). O!Play Air can do faster - I know it from a test with
TVMOBiLi (up to 32x). By the way: TVMOBiLi identifies an ASUS O!Play Air as
"POSIX UPnP/1.0 Intel MicroStack/1.0.2718, O!Play_Air, DLNADOC/1.50" - whatever that means...
A little more annoying is that during the last minute of a video (H.264 videos, I think) the ASUS player says "I/O error" and prompts me with an "OK" - no other choice... And of cause, the video does not continue.
For ASUS users: when I started with the ASUS O!Play Air, I had the problem that the player sometimes did not find any DLNA server on my PC. Solution: switching the channel set up of my WLAN from
"automatic" to a fixed channel, e.g. channel 5. This works at least with my
Speedport W 723V (German telecom).
From my point of view, it would be nice to create a profile for an ASUS O!Play Air (or for ASUS O!Plays in general). If I could be helpful in testing profiles with this ASUS player, do not hesitate to provide me with profiles. Thanks in advance...!
Best regards
CC5