Transcoding on Roku3 - No audio with some files
Was running Serviio 1.6, just upgraded to 1.7.1 which (unsurprisingly) didn't help.
Can anyone provide suggestions?
I've tried messing with the transcoding profile, but am not finding the right combination (though I don't have much experience manipulating the profiles). The amp I'm using says it supports the following, and it's set to "Auto Input" mode to detect incoming signal type:
Built-in Decoders
DTS 96/24, DTS Neo:6, DTS decoder, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, Dolby Digital, Dolby Digital Surround EX, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx
Here's the output of "ffmpeg -i"
- Code:
libavutil 52. 19.100 / 52. 19.100
libavcodec 55. 0.100 / 55. 0.100
libavformat 55. 0.100 / 55. 0.100
libavdevice 54. 4.100 / 54. 4.100
libavfilter 3. 45.103 / 3. 45.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Input #0, matroska,webm, from 'MyVideoFile.WEBRip.X264-DEFLATE.mkv':
Metadata:
creation_time : 2016-10-30 00:02:05
Duration: 00:27:27.30, start: 0.000000, bitrate: 4816 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
Stream #0:1(eng): Audio: eac3, 48000 Hz, 5.1(side), fltp, 640 kb/s (default)
Stream #0:2(eng): Subtitle: subrip
Metadata:
title : English
Stream #0:3(eng): Subtitle: subrip
Metadata:
title : English (SDH)