FAQ  •  Register  •  Login

samsung n series tv profile (i.e., nu 8000, 7100, 6900, etc)

<<

bryon575

Serviio newbie

Posts: 1

Joined: Sun Dec 09, 2018 12:54 am

Post Sun Dec 09, 2018 12:59 am

samsung n series tv profile (i.e., nu 8000, 7100, 6900, etc)

can someone make it?
<<

dovedescent7

Serviio newbie

Posts: 11

Joined: Fri Jul 24, 2015 2:11 am

Post Thu Feb 07, 2019 6:20 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

This doesn't answer your question directly, but it's a workaround.

Use the "roku 4k tv" profile for streaming to the nu series.
At least untill they make the new profile.
I have a un75nu7100 and this is working for me for 4k UHD hevc mkv files with truehd and dts audio.

The main issue is DTS audio-my samsung doesn't like it.

Another workaround is on this forum, regarding editing the profiles.xml which I can confirm also works but I'm having trouble finding it the thread

I should also point out that 99% of the problem in regards to transcoding files to nu7100 is the audio. I've tested by removing the audio from 10 different 4k mkvs and the TV plays all of them. Which tells that the audio is the problem.
If anyone is proficient in MKVToolnix and are desperate to test the tv, simply open file in MKVToolnix and remove the first audio, then click Start Muxing or Start Remuxing I forget which offhand. Then it'll spit out a compatible mkv that plays on the TV (if there's a second audio-check with media info)
The reason this works is because most of the 4k mkvs I come across with torrents have a 2nd audio which 99% of the time is AC3 in which the nu7100 series likes. The 1st audio is usually something the TV doesn't like such as DTS, DTSX Truehd Etc.

I'm no pro but I have spent the last two weeks working on serviio for the nu7100. I've got it streaming from Synology-docker, and windows 10 working great.

I hope this helps somebody. I agoninized over this for weeks.

And BTW, I'm pretty sure the serviio devs make profiles as fast as they can. I'm not sure if they are even paid, but we need to be patient and grateful they even make new profiles because I know they aren't getting rich from us
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Thu Feb 07, 2019 8:16 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Very few TVs support any audio codecs other than PCM and AC3 (Dolby Digital). Some older sets don't even support AC3 from an external source. But as mentioned, there might be other profiles that offer sufficient processing to handle the media you have. Testing other profiles is the first and best thing to try when you have issues with playback, particularly with a Smart TV.

Unfortunately, someone has to have a particular piece of equipment (such as an N series Samsung) to be able to create a profile. But if you identify files that will play and then files that won't, we can assist with suggestions for creating a user profile that you can save and won't get lost when Serviio is updated.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Sat Feb 09, 2019 3:06 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Looking at the specs it seems to play most mainstream media natively, with the exception of DTS audio. This is pretty common in newer TV's, i expect as the manufacturer can avoid paying licensing costs DTS.

Bearing in mind I haven't got this TV to test at all, I have constructed the attached profile based on simple DTS remuxing, and borrowing the header and detection blocks from the Samsung J profile. Detection may not work so you may have to manually assign the profile.

Save the attached file to your Serviio\config folder. In Serviio Console, Status tab, stop the Server (button at the bottom) and then restart it. This will reload the profiles. Check that the profile is assigned to your TV (you may need to refresh the tab) and if not manually assign it (profile is called "Samsung N Series (2018)").

Let me know how it goes.
Attachments
user-profiles.xml
(1.54 KiB) Downloaded 978 times
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

rrobert

Serviio newbie

Posts: 10

Joined: Mon Feb 04, 2019 7:56 am

Post Sun Feb 10, 2019 3:42 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

I know this is for the N series, tried it on my Q series TV and it did not work :-(
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Mon Feb 11, 2019 1:48 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

What didn’t work? Did it load?
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

rrobert

Serviio newbie

Posts: 10

Joined: Mon Feb 04, 2019 7:56 am

Post Tue Feb 12, 2019 3:31 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Sorry, you are right, I should be more specific.

I loaded the profile and I could see it. Assigned teh profile to my Q series TV ( I know this is a N series profile) and tried to watch some MKV with DTS enabled. MKV did not load. Samsung DNLA browser did not open the movie. Just got spinning blue circle.
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Tue Feb 12, 2019 9:12 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Not sure I can help. I don't have a Samsung TV but from the forums it appears some of the models in recent times had some issues handling transcoded file. I think the Q series was one of them.
Others may be able to help.
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Tue Feb 12, 2019 1:38 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Yes, my JU series won't play transcoded files. At least it couldn't last time I tried. I gave up on the Samsung internal player long ago. I first used a Roku player, and now have an Nvidia Shield on that TV. The Shield plays everything without transcoding, and provides all lossless audio codecs to my AVR. And my wife still uses the Sony BD player that's connected to it as well. Neither of us could deal with the Samsung functionality any longer. I couldn't even tell you the last time I used any app in the TV itself.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

Gamepat9

Serviio newbie

Posts: 1

Joined: Mon Oct 08, 2018 1:26 pm

Post Wed Jun 05, 2019 11:02 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

I'm sorry if this has been solved already, but I just wanted to post my custom Samsung NU8000 Profile that I created last year (I forgot to post it earlier).
It transcodes DTS to AC3 (If I remember correctly) and just streams everything else directly. The profiles I found here and tested all didn't work for me.
With this I can stream anything now (audio: dts 8-) , ac3) that I tested.
I apologize if the profile is super hacky, but it works for me. :D
Attachments
user-profiles.xml
Samsung NU Series 2018
(4.35 KiB) Downloaded 967 times
<<

Yoongbo

Serviio newbie

Posts: 7

Joined: Wed Jun 12, 2019 10:12 am

Post Wed Jun 12, 2019 10:36 am

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Gamepat9 wrote:I'm sorry if this has been solved already, but I just wanted to post my custom Samsung NU8000 Profile that I created last year (I forgot to post it earlier).
It transcodes DTS to AC3 (If I remember correctly) and just streams everything else directly. The profiles I found here and tested all didn't work for me.
With this I can stream anything now (audio: dts 8-) , ac3) that I tested.
I apologize if the profile is super hacky, but it works for me. :D


Hi guys, The above profile (thanks Gamepat9) allows me to watch .mkv movies with DTS audio but not fast forward/backward. Same thing with using Roku 4k TV profile for this TV.
Is anyone here having the same issues ?
The generic DLNA profile can play those mkv and allows to fast forward/backward but without sound so I don't think this is an issue of mkv file type. Is there a profile for Samsung NU TV that fixes these issues ?
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed Jun 12, 2019 12:16 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Yoongbo wrote:
Gamepat9 wrote:I'm sorry if this has been solved already, but I just wanted to post my custom Samsung NU8000 Profile that I created last year (I forgot to post it earlier).
It transcodes DTS to AC3 (If I remember correctly) and just streams everything else directly. The profiles I found here and tested all didn't work for me.
With this I can stream anything now (audio: dts 8-) , ac3) that I tested.
I apologize if the profile is super hacky, but it works for me. :D


Hi guys, The above profile (thanks Gamepat9) allows me to watch .mkv movies with DTS audio but not fast forward/backward. Same thing with using Roku 4k TV profile for this TV.
Is anyone here having the same issues ?
The generic DLNA profile can play those mkv and allows to fast forward/backward but without sound so I don't think this is an issue of mkv file type. Is there a profile for Samsung NU TV that fixes these issues ?


Transcoding a file removes the ability to FF/Rewind, unless it is using the HLS transcoding format. If you've updated to Serviio 2.0, the Roku profiles now all use HLS unless the video codec is VC-1. You might try the Roku 4K TV profile again to see if it works now. The Chaneru profile also uses HLS, although it transcodes far more than your TV requires. But it would be a good test.

You are correct that it's not the MKV container. The same happens regardless of container if transcoding is necessary.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

Yoongbo

Serviio newbie

Posts: 7

Joined: Wed Jun 12, 2019 10:12 am

Post Wed Jun 12, 2019 4:17 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

atc98092 wrote:
Yoongbo wrote:
Gamepat9 wrote:I'm sorry if this has been solved already, but I just wanted to post my custom Samsung NU8000 Profile that I created last year (I forgot to post it earlier).
It transcodes DTS to AC3 (If I remember correctly) and just streams everything else directly. The profiles I found here and tested all didn't work for me.
With this I can stream anything now (audio: dts 8-) , ac3) that I tested.
I apologize if the profile is super hacky, but it works for me. :D


Hi guys, The above profile (thanks Gamepat9) allows me to watch .mkv movies with DTS audio but not fast forward/backward. Same thing with using Roku 4k TV profile for this TV.
Is anyone here having the same issues ?
The generic DLNA profile can play those mkv and allows to fast forward/backward but without sound so I don't think this is an issue of mkv file type. Is there a profile for Samsung NU TV that fixes these issues ?


Transcoding a file removes the ability to FF/Rewind, unless it is using the HLS transcoding format. If you've updated to Serviio 2.0, the Roku profiles now all use HLS unless the video codec is VC-1. You might try the Roku 4K TV profile again to see if it works now. The Chaneru profile also uses HLS, although it transcodes far more than your TV requires. But it would be a good test.

You are correct that it's not the MKV container. The same happens regardless of container if transcoding is necessary.


I'm running Serviio 2.0, unfortunately neither Roku 4K TV nor Chaneru makes FF/Rewind available. Any idea why ?
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed Jun 12, 2019 4:52 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

I"d have to know the codec specifics about your media file. I know it's in a MKV container, but need the details about the audio and video codecs it contains to determine what's going on. Like I said, if the video is VC-1, the Roku profile uses a different method of transcoding that doesn't support trick play. I have no idea if a Samsung TV will play VC-1 video, although the fact you can play it without audio at least points to a supported video codec.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

Yoongbo

Serviio newbie

Posts: 7

Joined: Wed Jun 12, 2019 10:12 am

Post Thu Jun 13, 2019 2:23 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

atc98092 wrote:I"d have to know the codec specifics about your media file. I know it's in a MKV container, but need the details about the audio and video codecs it contains to determine what's going on. Like I said, if the video is VC-1, the Roku profile uses a different method of transcoding that doesn't support trick play. I have no idea if a Samsung TV will play VC-1 video, although the fact you can play it without audio at least points to a supported video codec.

Sry should have posted it earlier. Here are 2 of the files:

File 1: My TV can play this one and there's ff/rw but no sound. When the file is being transcoded with the mentioned profiles, I have both video and sound but no ff/rw.
  Code:
Format                      : Matroska
Format version              : Version 2
File size                   : 4.36 GiB
Duration                    : 1 h 39 min
Overall bit rate            : 6 258 kb/s
Encoded date                : UTC 2011-02-24 14:20:32
Writing application         : mkvmerge v4.0.0 ('The Stars were mine') built on Jun  6 2010 16:18:42
Writing library             : libebml v1.0.0 + libmatroska v1.0.0

Video
ID                          : 1
Format                      : AVC
Format/Info                 : Advanced Video Codec
Format profile              : High@L4.1
Format settings             : CABAC / 5 Ref Frames
Format settings, CABAC      : Yes
Format settings, ReFrames   : 5 frames
Codec ID                    : V_MPEG4/ISO/AVC
Duration                    : 1 h 39 min
Bit rate                    : 4 746 kb/s
Width                       : 1 280 pixels
Height                      : 720 pixels
Display aspect ratio        : 16:9
Frame rate mode             : Constant
Frame rate                  : 23.976 (24000/1001) FPS
Color space                 : YUV
Chroma subsampling          : 4:2:0
Bit depth                   : 8 bits
Scan type                   : Progressive
Bits/(Pixel*Frame)          : 0.215
Stream size                 : 3.22 GiB (74%)
Writing library             : x264 core 114 r1913 5fd3dce
Encoding settings           : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=0 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=4746 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language                    : English
Default                     : No
Forced                      : No

Audio
ID                          : 2
Format                      : DTS
Format/Info                 : Digital Theater Systems
Codec ID                    : A_DTS
Duration                    : 1 h 39 min
Bit rate mode               : Constant
Bit rate                    : 1 509 kb/s
Channel(s)                  : 6 channels
Channel positions           : Front: L C R, Side: L R, LFE
Sampling rate               : 48.0 kHz
Frame rate                  : 93.750 FPS (512 SPF)
Bit depth                   : 24 bits
Compression mode            : Lossy
Stream size                 : 1.05 GiB (24%)
Default                     : Yes
Forced                      : No


File 1: My TV can play this one well with both video and audio and there's ff/rw. When the file is being transcoded with the mentioned profiles, I have both video and sound but no ff/rw.
  Code:
Format                      : Matroska
Format version              : Version 4 / Version 2
File size                   : 4.37 GiB
Duration                    : 1 h 56 min
Overall bit rate            : 5 373 kb/s
Encoded date                : UTC 2019-06-10 20:31:28
Writing application         : mkvmerge v33.0.0 ('A Little Bit of Madness') 64-bit
Writing library             : libebml v1.3.7 + libmatroska v1.5.0

Video
ID                          : 1
Format                      : AVC
Format/Info                 : Advanced Video Codec
Format profile              : High@L4.1
Format settings             : CABAC / 5 Ref Frames
Format settings, CABAC      : Yes
Format settings, ReFrames   : 5 frames
Codec ID                    : V_MPEG4/ISO/AVC
Duration                    : 1 h 56 min
Bit rate                    : 4 732 kb/s
Width                       : 1 280 pixels
Height                      : 536 pixels
Display aspect ratio        : 2.40:1
Frame rate mode             : Constant
Frame rate                  : 23.976 (24000/1001) FPS
Color space                 : YUV
Chroma subsampling          : 4:2:0
Bit depth                   : 8 bits
Scan type                   : Progressive
Bits/(Pixel*Frame)          : 0.288
Stream size                 : 3.85 GiB (88%)
Writing library             : x264 core 157 r2970 5493be8
Encoding settings           : cabac=1 / ref=5 / deblock=1:-3:-3 / analyse=0x3:0x113 / me=umh / subme=8 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=17 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=4732 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language                    : English
Default                     : Yes
Forced                      : No

Audio
ID                          : 2
Format                      : AC-3
Format/Info                 : Audio Coding 3
Codec ID                    : A_AC3
Duration                    : 1 h 56 min
Bit rate mode               : Constant
Bit rate                    : 640 kb/s
Channel(s)                  : 6 channels
Channel positions           : Front: L C R, Side: L R, LFE
Sampling rate               : 48.0 kHz
Frame rate                  : 31.250 FPS (1536 SPF)
Bit depth                   : 16 bits
Compression mode            : Lossy
Stream size                 : 533 MiB (12%)
Language                    : English
Service kind                : Complete Main
Default                     : Yes
Forced                      : No


Does the codec id V_MPEG4/ISO/AVC mean it's VC-1 ? If that's the case, I guess there's no way for me to stream video with DTS sound from a device in another room to my TV and still have the ability to FF/RW :cry: I heard people invested in NAS, how could it be worth it if they had to convert audio to ac-3 for each movie ? Or are your TV simply smarter can play anything by itself ?
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Thu Jun 13, 2019 4:30 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

No, I don't believe codec id V_MPEG4/ISO/AVC is VC-1. The second file is playing fine because it has Dolby Digital sound (ac3). The first one has DTS sound, which requires the transcoding. I'll have to review the profiles to see why the second one is being transcoded, as it should be playable as is.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

Yoongbo

Serviio newbie

Posts: 7

Joined: Wed Jun 12, 2019 10:12 am

Post Thu Jun 13, 2019 7:32 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

atc98092 wrote:No, I don't believe codec id V_MPEG4/ISO/AVC is VC-1. The second file is playing fine because it has Dolby Digital sound (ac3). The first one has DTS sound, which requires the transcoding. I'll have to review the profiles to see why the second one is being transcoded, as it should be playable as is.

I'm looking forward to your finding. Please also find out why those profiles still make ff/rw unavailable. Thank you !!!
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Thu Jun 13, 2019 11:21 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

Yoongbo wrote:
atc98092 wrote:No, I don't believe codec id V_MPEG4/ISO/AVC is VC-1. The second file is playing fine because it has Dolby Digital sound (ac3). The first one has DTS sound, which requires the transcoding. I'll have to review the profiles to see why the second one is being transcoded, as it should be playable as is.

I'm looking forward to your finding. Please also find out why those profiles still make ff/rw unavailable. Thank you !!!


Any profile that transcodes will lose trick play, unless it uses HLS transcoding. I'm assuming your TV is 4K capable, but if it's not then the "Roku 1080 Media Player (2016+)" profile is a good one to test with. I'm looking at that profile now, I can't see anything that would cause your 2nd file to transcode. The only possible Matches line is looking for a video with a width of greater than 1920. Both of your files have a width of 1280, so that line should be ignoring it.

Your video is H.264, and the only lines that Match that must also match the audio codec of dts-hd or truehd, which neither of your files have. I can't find any Roku profile that would cause your file with ac3 audio to transcode except the basic "Roku Media Player" profile. Please make absolutely sure you are using a different Roku profile. IN fact, I suggest trying the Roku 4K TV profile, as that most likely matches the capabilities of your TV the closest.

If it is still transcoding the 2nd file, then I have to see a detailed log. Follow the link to see how to enable it, and make sure you delete your existing log before you run the detailed one. It gets very large quickly, so we don't need any extra information within it.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

Yoongbo

Serviio newbie

Posts: 7

Joined: Wed Jun 12, 2019 10:12 am

Post Fri Jun 14, 2019 1:52 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

atc98092 wrote:
Yoongbo wrote:
atc98092 wrote:No, I don't believe codec id V_MPEG4/ISO/AVC is VC-1. The second file is playing fine because it has Dolby Digital sound (ac3). The first one has DTS sound, which requires the transcoding. I'll have to review the profiles to see why the second one is being transcoded, as it should be playable as is.

I'm looking forward to your finding. Please also find out why those profiles still make ff/rw unavailable. Thank you !!!


Any profile that transcodes will lose trick play, unless it uses HLS transcoding...


Yet trick play is unavailable for me with Serviio 2.0 and Roku 4K TV profile, which like you said, uses HLS transcoding. I've always been using this profile and Serviio 2.0. So I don't understand why.
And yes my TV is 4K. Videos are streamed from my Windows 10 PC.
Below is the log. It was recorded when the second file was being streamed using Roku 4K TV profile (which made trick play become unavailable).
Attachments
serviio.log
(425.36 KiB) Downloaded 601 times
<<

atc98092

User avatar

DLNA master

Posts: 5202

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Fri Jun 14, 2019 5:22 pm

Re: samsung n series tv profile (i.e., nu 8000, 7100, 6900,

can you tell me the file name? There's almost 3000 lines to go through in the log, and that would save time for searching.
Dan

LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
Next

Return to Samsung

Who is online

Users browsing this forum: No registered users and 21 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.