FAQ  •  Register  •  Login

Samsung UE40D6100 disconnects and cant re connect

<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Wed Nov 02, 2011 3:47 pm

Samsung UE40D6100 disconnects and cant re connect

Hi all!

I tryed this twice, i install the program run it, select Samsung TV / player (C/D-series). (the router is already configured IP is fixed, ports are open 1900, 8895, 23423)
I use Nod32 5.0.94.0 (added TVs IP to trusted zone + ports), have windows 7, file sharing is enabled, "C:\Program Files\Windows Media Player\wmpnetwk.exe" (service disabled)
I tryed WiFi / LAN cable also.

With fresh install i can connect to serviio with no problems (was very happy about that). I open a movie play it, after 10 minutes i decide to try another movie,i go back , to select another movie, than it says "device disconnected" and now i dont see servio in the source list of the TV , i have a Linksys Wireless-N WRT160NL router.
I checked TV it has network + internet, in the routers setup i can see the TV, with "network magic" also.
I hit refresh + restart service still nothing. Sometimes it helps when i remove the TV from the status page, and reenter the IP from the Tv.
I looked hours on net maybe some 1 have the same problem but no luck yet. :cry:
Attachments
serviio.log
serviio log (debug)
(68.32 KiB) Downloaded 345 times
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Thu Nov 03, 2011 5:41 am

Re: Samsung UE40D6100 disconnects and cant re connect

any1 have some tips :?: :roll:
<<

Illico

User avatar

DLNA master

Posts: 4646

Joined: Fri Jul 23, 2010 8:08 am

Location: France

Post Thu Nov 03, 2011 8:23 am

Re: Samsung UE40D6100 disconnects and cant re connect

:idea: Change the channel of your Wireless-N WRT160NL router.
Illico
Sony 2010 KDL-46EX501 | BDP-S373 | SMP-N100 | Windows 8-i7 | Network DD HD-CE1.5TLU2 | Livebox2-UHD86 | ServiiDroid | ServiiGo | BubbleUPnP
Serviio beta tester - Moderator
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Thu Nov 03, 2011 9:34 am

Re: Samsung UE40D6100 disconnects and cant re connect

Illico wrote::idea: Change the channel of your Wireless-N WRT160NL router.


Thanks, wich 1 did you mean :?:
(see attachments)
Attachments
Basic Wireless Settings.JPG
Basic Wireless Settings
Basic Wireless Settings.JPG (11.25 KiB) Viewed 8890 times
Advanced Wireless Settings.JPG
Advanced Wireless Settings
Advanced Wireless Settings.JPG (23.97 KiB) Viewed 8890 times
<<

Illico

User avatar

DLNA master

Posts: 4646

Joined: Fri Jul 23, 2010 8:08 am

Location: France

Post Thu Nov 03, 2011 9:59 am

Re: Samsung UE40D6100 disconnects and cant re connect

http://netlink.com.ua/media/products/01 ... 076662.pdf
Page 10.
Try change Channel Width with "Wide - 40MHz Channel" or "Standard - 20MHz Channel."
Illico
Sony 2010 KDL-46EX501 | BDP-S373 | SMP-N100 | Windows 8-i7 | Network DD HD-CE1.5TLU2 | Livebox2-UHD86 | ServiiDroid | ServiiGo | BubbleUPnP
Serviio beta tester - Moderator
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Thu Nov 03, 2011 10:52 am

Re: Samsung UE40D6100 disconnects and cant re connect

Illico wrote:http://netlink.com.ua/media/products/0157416001262076662.pdf
Page 10.
Try change Channel Width with "Wide - 40MHz Channel" or "Standard - 20MHz Channel."



I changed it this way, after i go home i will try it. Hope it helps.
Thanks anyways :)
Attachments
Basic Wireless Settings.JPG
Basic
Basic Wireless Settings.JPG (12.65 KiB) Viewed 8882 times
<<

moltra

DLNA master

Posts: 1871

Joined: Thu Mar 24, 2011 11:00 pm

Location: Ohio USA

Post Thu Nov 03, 2011 11:18 am

Re: Samsung UE40D6100 disconnects and cant re connect

Also run run the tool from this post.

http://forum.serviio.org/viewtopic.php?f=17&t=2439

You might be using a channel that one of your neighbors is using at the same time. I recommend everyone that is using wireless and has close neighbors to run this. If two routers are on the same channel and close together they have to share time slices on the channel.
Mark
Beta Tester Group
http://www.serviidb.com Online media resource repository

Netgear EVA2000 | Samsung BD-D5300 | XBOX 360 | Windows 7 | Mint Debian 12 | Raxz Maxx
HowTo: Provide supported formats of a device HowTo: Record a new ticket on Bitbucket
HowTo: Provide details of a video file that doesn't play HowTo: Turn on detailed logging
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Thu Nov 03, 2011 12:55 pm

Re: Samsung UE40D6100 disconnects and cant re connect

moltra wrote:Also run run the tool from this post.

http://forum.serviio.org/viewtopic.php?f=17&t=2439

You might be using a channel that one of your neighbors is using at the same time. I recommend everyone that is using wireless and has close neighbors to run this. If two routers are on the same channel and close together they have to share time slices on the channel.


I used the tool that you linked, no other WiFis found.
And still my TV cant see serviio. :x
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Sat Nov 05, 2011 5:08 am

Re: Samsung UE40D6100 disconnects and cant re connect

Any1 other ideas :?: :roll:
<<

YTMY

User avatar

Serviio lover

Posts: 73

Joined: Wed May 04, 2011 7:02 pm

Location: Vilnius, Lithuania

Post Mon Nov 07, 2011 11:15 am

Re: Samsung UE40D6100 disconnects and cant re connect

ratyip4 wrote:Any1 other ideas :?: :roll:


If I see correctly "AP isolation" is enabled. You should disable it (as by default) because with this option enabled your network devices cannot see each other (no homegroup, no communication between devices, no nothing, except access to internet for all devices).

Hope this helps.
| Samsung UE32C6500 LED | Windows 7 x64 | 5Ghz wi-fi N 300Mbps setup |
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Sun Nov 13, 2011 1:38 pm

Re: Samsung UE40D6100 disconnects and cant re connect

YTMY wrote:
ratyip4 wrote:Any1 other ideas :?: :roll:


If I see correctly "AP isolation" is enabled. You should disable it (as by default) because with this option enabled your network devices cannot see each other (no homegroup, no communication between devices, no nothing, except access to internet for all devices).

Hope this helps.


Nope, i have set it to disabled, and now cant even se serviio :x
Thanks anyways
<<

YTMY

User avatar

Serviio lover

Posts: 73

Joined: Wed May 04, 2011 7:02 pm

Location: Vilnius, Lithuania

Post Mon Nov 14, 2011 7:27 pm

Re: Samsung UE40D6100 disconnects and cant re connect

If I were You I would reset router to factory default and start everything clean and see if it works without any changes to router settings. For wireless security use WPA2 personal with AES encryption (if You use any at all). Maybe something went wrong with router settings.

Is signal near TV strong or is it variable? Have You tried cable connection to TV? ;)
| Samsung UE32C6500 LED | Windows 7 x64 | 5Ghz wi-fi N 300Mbps setup |
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Tue Nov 15, 2011 7:39 am

Re: Samsung UE40D6100 disconnects and cant re connect

YTMY wrote:If I were You I would reset router to factory default and start everything clean and see if it works without any changes to router settings. For wireless security use WPA2 personal with AES encryption (if You use any at all). Maybe something went wrong with router settings.

Is signal near TV strong or is it variable? Have You tried cable connection to TV? ;)


Done, reseted the router: i use WPA2 with AES.
Signal isnt weak the router is 2m from the TV, cable also tryed. Still not working :x

Thanks anyways 8-)
<<

YTMY

User avatar

Serviio lover

Posts: 73

Joined: Wed May 04, 2011 7:02 pm

Location: Vilnius, Lithuania

Post Tue Nov 15, 2011 11:21 am

Re: Samsung UE40D6100 disconnects and cant re connect

Strange, if its failing on cable, it might be firewall issue, QoS settings on router, and I'm out of ideas.. :) Maybe another router would help to rule out (or confirm) the router issue.

I hope You will rule it out eventually. ;)
| Samsung UE32C6500 LED | Windows 7 x64 | 5Ghz wi-fi N 300Mbps setup |
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Tue Nov 15, 2011 12:58 pm

Re: Samsung UE40D6100 disconnects and cant re connect

YTMY wrote:Strange, if its failing on cable, it might be firewall issue, QoS settings on router, and I'm out of ideas.. :) Maybe another router would help to rule out (or confirm) the router issue.

I hope You will rule it out eventually. ;)


Thanks for help again! :)
Try'd to turn off firewall also (Windows 7 and ESET 5 also).

Well this is my 4. router this year :D and wasnt cheap, so i try to borrow one...

My last try will be to reinstall the windows, but Serviio can detect my TV, status green on the main page, but after i hit refresh, i still cant see Serviio on my TV :( )

QoS settings below:
Attachments
QS.JPG
QoS settings
QS.JPG (19.85 KiB) Viewed 8534 times
<<

YTMY

User avatar

Serviio lover

Posts: 73

Joined: Wed May 04, 2011 7:02 pm

Location: Vilnius, Lithuania

Post Wed Nov 16, 2011 8:18 pm

Re: Samsung UE40D6100 disconnects and cant re connect

If it is indeed a router fault, I would not throw it away, I would try tomatousb (toastman edit) firmware. Works very well for both of my linksys routers. ;)

br
| Samsung UE32C6500 LED | Windows 7 x64 | 5Ghz wi-fi N 300Mbps setup |
<<

ratyip4

Serviio newbie

Posts: 13

Joined: Tue Nov 01, 2011 10:40 am

Post Fri Nov 18, 2011 1:51 pm

Re: Samsung UE40D6100 disconnects and cant re connect

YTMY wrote:If it is indeed a router fault, I would not throw it away, I would try tomatousb (toastman edit) firmware. Works very well for both of my linksys routers. ;)

br


i upgraded to "Firmware: DD-WRT v24-sp2 (08/07/10) std"
but still not working :( , later i try to reinstall the opsys maybe it helps :(

Thanks

Return to Samsung

Who is online

Users browsing this forum: No registered users and 8 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.