Page 1 of 1
D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 2:04 pmby tweesty
Hi all!
First, sorry for my english which is bad....
I bought a D7000 and I install on my pc Servio"s server.
Into the console, i see the tv and its ip adress. But on my TV, it doesn't found my server.
Here a screenshot:
http://imageshack.us/photo/my-images/808/79346316.png/Thank you for listening.
Best regards.
PS: I switch off my firewall
A French
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 2:15 pmby jhb50
Are you sure your serviio pc is at 1.11? Try leaving the bind address blank so the default is used.
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 3:03 pmby tweesty
Yeah, i'm sure. It doesn't work too with ip default
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 3:39 pmby jhb50
OK, then you need to set the log to DEBUG and post it here so we can see what is happening.
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 4:01 pmby tweesty
Here the log.
Thanks
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 4:24 pmby jhb50
Not sure what you have done.
You need to set the log to DEBUG for more info. Serach for how.
It looks like you did not setup any folders to add to the library, but then after a couple of hours you did and Serviio started to add them but you quit in the middle of that and then an hour later it looks like you added All-Share and then the log stops.
Have you read the install documentation? Click on the SERVIIO logo above and then the support tab. Might give you a clue.
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 8:37 pmby tweesty
Hi!
When i am on allshare, i see my serviio
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 8:45 pmby jhb50
Not sure what that means but glad its working for you.
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 8:53 pmby tweesty
I see it on allshare on my pc but i don't see it on my tv ;D
Re: D7000 TV Doesn't found Servio
Posted:
Sun Dec 18, 2011 9:55 pmby jhb50
OK lets see the debug log, and the details of your pc and network.
I trust we are taking about the Samsung All-Share server.
If you don't see All-Share on the TV either then your problem is probably not with Serviio, but with your pc/network setup. Were there no clues in the faq?
Re: D7000 TV Doesn't found Servio
Posted:
Mon Dec 19, 2011 11:37 amby tweesty
Hi!
My tv sees AllShare without problem
Re: D7000 TV Doesn't found Servio
Posted:
Mon Dec 19, 2011 12:52 pmby tweesty
Hi!
I put servio on my linux, and my tv sees servio's server.
But when I launch a movie, TV prints "filetype not recognize". However with allshare, it works.
What is the problem?
Thank you for listening.
PS: I disable "transcoding".
Re: D7000 TV Doesn't found Servio
Posted:
Mon Dec 19, 2011 2:15 pmby zip
make sure the Samsung C/D series profile is selected in the console
Re: D7000 TV Doesn't found Servio
Posted:
Thu Dec 22, 2011 10:17 pmby Cerberus
tweesty wrote:Hi!
I put servio on my linux, and my tv sees servio's server.
But when I launch a movie, TV prints "filetype not recognize". However with allshare, it works.
What is the problem?
Thank you for listening.
PS: I disable "transcoding".
well if you disable transcoding it not gunna work
Re: D7000 TV Doesn't found Servio
Posted:
Sat Dec 24, 2011 1:53 pmby zip
Cerberus wrote:tweesty wrote:Hi!
I put servio on my linux, and my tv sees servio's server.
But when I launch a movie, TV prints "filetype not recognize". However with allshare, it works.
What is the problem?
Thank you for listening.
PS: I disable "transcoding".
well if you disable transcoding it not gunna work
AllShare doesnt transcode so it should work without it
