Serviio

Posted: **Sat Jan 28, 2012 2:36 am**

I have successfully playing mkv on my Panasonic L42E30H without transcoding and subtitle is working fine. However, I got some other video that is not the same result. The video playback has some distorted view in some scenes. The scenes that got problem are always in similar position. As I don't know a single word to name it, the video that I saw seems like a previous frame is not completely remove and the new frame overlapped partially in the old frame. Only the moving part in the new frame is shown while part of the old frame is still here. How should I describe it in English? Pardon for my poor vocabulary.

Code:: ffmpeg version 0.9, Copyright (c) 2000-2011 the FFmpeg developers built on Dec 13 2011 20:46:11 with gcc 4.4.2 configuration: --enable-static --disable-shared --disable-ffplay --disable-ffs erver --enable-memalign-hack --enable-libmp3lame --enable-librtmp --extra-libs=' -lrtmp -lpolarssl -lws2_32 -lwinmm' --arch=x86 --enable-runtime-cpudetect --enab le-pthreads --target-os=mingw32 --cross-prefix=i686-mingw32- --pkg-config=pkg-co nfig libavutil 51. 32. 0 / 51. 32. 0 libavcodec 53. 42. 0 / 53. 42. 0 libavformat 53. 24. 0 / 53. 24. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 53. 0 / 2. 53. 0 libswscale 2. 1. 0 / 2. 1. 0 Seems stream 0 codec frame rate differs from container frame rate: 47.95 (200000 00/417083) -> 48.00 (48/1) Input #0, matroska,webm, from 'Toy.Story.3.mkv': Duration: 01:42:35.90, start: 0.000000, bitrate: 11972 kb/s Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080, SAR 1:1 DAR 16:9, 23.98 fps, 48 tbr, 1k tbn, 47.95 tbc Metadata: title : Toy.Story.3.2010 Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s Metadata: title : DTS-ES5.1 1536K Stream #0:2(chi): Audio: ac3, 48000 Hz, 5.1(side), s16, 640 kb/s Metadata: title : DDEX 5.1 640K 蝎方祗

The above result is generated from ffmpeg -i. I wonder whether it's the problem with the bitrate. It's around 11Mb/s. Another video that I have completed without any problem has a lower bitrate. My network connection is like the below.
PC <-- LAN --> router <-- LAN --> TV
All are connected by cable.

Posted: **Sat Jan 28, 2012 5:50 pm**

that will be a corrupt file rather than a serviio issue.

Posted: **Sun Jan 29, 2012 3:46 am**

However, it plays nicely on my PC. Better error correction in PC??

Posted: **Sun Jan 29, 2012 3:57 am**

cwlaualex wrote:However, it plays nicely on my PC. Better error correction in PC??

yer more tollerant.

Posted: **Mon Jan 30, 2012 1:28 pm**

cwlaualex wrote:However, it plays nicely on my PC. Better error correction in PC??

Could you post a mediainfo of that file ?

Posted: **Tue Jan 31, 2012 3:06 pm**

Code:: General Unique ID : 199473196993062965995983977073665753833 (0x961123EBF4D8951191B1012317C5C2E9) Complete name : E:\DVD\Toy Story\Toy.Story.3.mkv Format : Matroska Format version : Version 2 File size : 8.58 GiB Duration : 1h 42mn Overall bit rate : 12.0 Mbps Encoded date : UTC 2012-01-23 08:59:47 Writing application : mkvmerge v5.2.1 ('A Far Off Place') built on Jan 2 2012 23:21:10 Writing library : libebml v1.2.3 + libmatroska v1.3.0 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 4 frames Codec ID : V_MPEG4/ISO/AVC Duration : 1h 42mn Bit rate : 9 824 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.198 Stream size : 6.87 GiB (80%) Title : Toy.Story.3.2010 Writing library : x264 core 102 r1666 d058f37 Encoding settings : cabac=1 / ref=4 / deblock=1:-2:-2 / analyse=0x3:0x113 / me=umh / subme=10 / psy=1 / psy_rd=1.05:0.10 / mixed_ref=1 / me_range=48 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=2 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=5 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=9824 / ratetol=2.0 / qcomp=0.70 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=50000 / vbv_bufsize=50000 / ip_ratio=1.40 / aq=1:0.90 / nal_hrd=none Language : English Default : No Forced : No Audio #1 ID : 2 Format : DTS Format/Info : Digital Theater Systems Format profile : ES Codec ID : A_DTS Duration : 1h 42mn Bit rate mode : Constant Bit rate : 1 510 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Bit depth : 24 bits Compression mode : Lossy Stream size : 1.08 GiB (13%) Title : DTS-ES5.1 1536K Language : English Default : No Forced : No Audio #2 ID : 3 Format : AC-3 Format/Info : Audio Coding 3 Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 42mn Bit rate mode : Constant Bit rate : 640 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 470 MiB (5%) Title : DDEX 5.1 640K 粤语 Language : Chinese Default : No Forced : No

I got a few video that have this problem. This is one of the example.

Posted: **Tue Jan 31, 2012 3:54 pm**

Thanks for your input it will help troubleshooting. I have similar problems and we're trying to work this out.

Posted: **Tue Jan 31, 2012 4:03 pm**

I suppose Panasonic devices does not support DTS audio, so
Could remove the DTS track by remuxing the file with mkvmerge tool (AVC+AC3)?

Posted: **Tue Jan 31, 2012 4:24 pm**

I believe E-series do support DTS Illico.
EDIT: Just tested and yes, E-30 Series at least do support DTS.

Serviio

Blocky video

Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video

Re: Blocky video