Page 1 of 1
Problem after installation on Synology NAS
Posted:
Mon Jun 10, 2019 9:53 amby greekdroid
Hi
After upgrading to version 2.0, I get the following messages. Also, I can not log in via MediaBroswer anymore. The entry where I can capture the users is missing.
Thank you for your help
- FM1
- 2019-06-10 11_47_35-Microsoft Edge.png (38.79 KiB) Viewed 6960 times
- 2019-06-10 11_48_04-Window.png (48.97 KiB) Viewed 6960 times
Re: Problem after installation on Synology NAS
Posted:
Mon Jun 10, 2019 12:00 pmby greekdroid
The problem is solved. It's up to Chrome.
Re: Problem after installation on Synology NAS
Posted:
Sat Jun 15, 2019 5:44 pmby Sebastian_T
Not only Chrome, also Mozilla Firefox - the same.
Re: Problem after installation on Synology NAS
Posted:
Sat Jun 15, 2019 9:33 pmby atc98092
Actually you just need to clear your browser cache. There's quite a difference with V2.0, and anything remaining in the cache messes up the console.
Re: Problem after installation on Synology NAS
Posted:
Fri Jun 28, 2019 8:41 amby patters
... which is why I put a message to do this in the "What's new in this version" text that gets displayed in Package Manager
Updated to Serviio 2.0, clear your web browser cache to fix Serviio Console issues
Re: Problem after installation on Synology NAS
Posted:
Mon Jul 22, 2019 6:07 amby Sebastian_T
Another problem found.
Was not present on earlier versions. After update to 2.0 - Serviio (on Synology NAS) dissappears from the network - have to stop the Serviio process in Synology and restart it, only after that server apppears in network and can be used normally.
After some hours (eg. night) of not using situation is the same - have to restart the process. AND - I can see Serviio via computer, but cannot see on other devices, like TV; restarting server via Serviio console does not help, has to be restarted in Synology system.