Page 1 of 3

DLNA Device Support Information.

PostPosted: Thu Jan 05, 2012 8:58 pm
by Cerberus
TOSHIBA DEVICES ONLY PLEASE

I am currently adding more DLNA support information to the serviio wiki and need the help of the users of the Toshiba Devices, please can you provide SINK report for all of your Toshiba devices if NOT listed below.

Current Toshiba devices I have reports for are:

Toshiba Regza WL743

i have attached a howto link and a sample file of how i need the information formated and suplied to make my life easier and get job done faster.

HOWTO: http://wiki.serviio.org/doku.php?id=device_sf

Sample File

LW550T.txt
(1.27 KiB) Downloaded 718 times


Kind Regards Cerberus

Mods: can we please stick and leave unlocked please

Re: DLNA Device Support Information.

PostPosted: Mon Jan 23, 2012 7:45 am
by Roderick
Here's the info on the 32SL800A

http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_NTSC,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_HD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_EU_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=AVC_TS_HD_60_AC3_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=AVC_TS_HD_24_AC3_T,
http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/mpeg:DLNA.ORG_PN=MP3,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_SM,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_MED

Re: DLNA Device Support Information.

PostPosted: Mon Jan 23, 2012 8:02 am
by Cerberus
thanks added to wiki.

Re: DLNA Device Support Information.

PostPosted: Mon Feb 06, 2012 1:53 pm
by macgd016
Here you are, 40WL753 info:

  Code:
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_NTSC,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_HD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_EU_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU_T,
http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/mpeg:DLNA.ORG_PN=MP3,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_SM,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_MED

Re: DLNA Device Support Information.

PostPosted: Mon Feb 06, 2012 6:12 pm
by Cerberus
macgd016 wrote:Here you are, 40WL753 info:

http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_NTSC,http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA,http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_NA_ISO,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA_T,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA,http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_HD_NA_ISO,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA_T,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU,http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_EU_ISO,http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU_T,http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,http-get:*:audio/mpeg:DLNA.ORG_PN=MP3,http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_SM,http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_MED


thanks will add to wiki when i have a moment,.

EDIT: Done this comes under the WL series.

Re: DLNA Device Support Information.

PostPosted: Sat May 19, 2012 5:38 pm
by kazan
Toshiba Regza 42WL863

http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_NTSC,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_HD_NA_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_HD_NA_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU,
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_TS_SD_EU_ISO,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=MPEG_TS_SD_EU_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=AVC_TS_HD_60_AC3_T,
http-get:*:video/vnd.dlna.mpeg-tts:DLNA.ORG_PN=AVC_TS_HD_24_AC3_T,
http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/mpeg:DLNA.ORG_PN=MP3,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_SM,
http-get:*:image/jpeg:DLNA.ORG_PN=JPEG_MED


|Kazan|

Re: DLNA Device Support Information.

PostPosted: Sun May 20, 2012 3:51 pm
by Illico
Thanks, its similar to all other Toshiba TV:
wiki.serviio.org/doku.php?id=devices_format_support

Re: DLNA Device Support Information.

PostPosted: Wed May 23, 2012 8:48 pm
by rodolfovento
Hi Illico :)

My english is very bad... sorry :(

I have a new TV Toshiba 46TL838 and can access to Serviio for browse my film.
In the pannell control of serviio my TV is classified as Generic DLNA Profile.

I follow yoru guide for discovere the correct information using Device Spy, but my TV dont recognized.
I search in the dlna.org and I found his specifics.
I'm not sure tha help you, but I send you the pdf that contein the specific...
REG88417223.pdf
(125.46 KiB) Downloaded 524 times

This is sufficent for help you to update serviio?

Bye

Re: DLNA Device Support Information.

PostPosted: Thu May 24, 2012 8:11 am
by Illico
rodolfovento wrote:I have a new TV Toshiba 46TL838 and can access to Serviio for browse my film.
In the pannell control of serviio my TV is classified as Generic DLNA Profile.

On serviio console, try to force "Toshiba" profile selected (click on profile name).
Could you enable detailed logging (see signature link) and post the result here ?

Re: DLNA Device Support Information.

PostPosted: Tue May 29, 2012 8:53 pm
by bibouchat
Hi everybody,

here is the support information for the tv toshiba 47VL863

Re: DLNA Device Support Information.

PostPosted: Thu Jun 07, 2012 6:30 am
by aff-tar
rodolfovento wrote:Hi Illico :)

My english is very bad... sorry :(

I have a new TV Toshiba 46TL838 and can access to Serviio for browse my film.
In the pannell control of serviio my TV is classified as Generic DLNA Profile.

I follow yoru guide for discovere the correct information using Device Spy, but my TV dont recognized.
I search in the dlna.org and I found his specifics.
I'm not sure tha help you, but I send you the pdf that contein the specific...
REG88417223.pdf

This is sufficent for help you to update serviio?

Bye


I had the same issue with 46TL868. The best Serviio profile for now is LG TV/Player (it disables transcoding at all).

Re: DLNA Device Support Information.

PostPosted: Mon Nov 19, 2012 9:40 pm
by mpi
Hi,

Just switched TV set to a Toshiba 55VL963F. It has latest firmware 6.9.ED.1
It seems current Toshiba REGZA profile is not appropriate for this set: generic profile seems better as first instance.
I tried to get info from Device spy, but Device spy can not detect this TV set.

Is DEBUG log supposed to provide similar info?
I did enable DEBUG, but could not find any meaningful info out of it.
Would be great if Serviio could do deliver such "spying" info.

Thanks for any help.

Re: DLNA Device Support Information.

PostPosted: Mon Nov 26, 2012 1:14 pm
by 888
Hi,
my TV is a 40TL963B, and as usual with this series of tv's it is not recognised by serviio or by the upnp tools.
by default it uses the Generic DNLA Profile, which works, apart from not being to play .avi's
when I change to the Toshiba Regza profile, I cant pause or fast forward the vid.
I've attached the DNLA certificate which hopefully you can use to create a profile for the TL series.
Thanks

great app by the way.....it is so much better then everything else that I've tried.

Re: DLNA Device Support Information.

PostPosted: Mon Nov 26, 2012 7:54 pm
by Illico
888 wrote:Hi,
my TV is a 40TL963B, and as usual with this series of tv's it is not recognised by serviio or by the upnp tools.
by default it uses the Generic DNLA Profile, which works, apart from not being to play .avi's
when I change to the Toshiba Regza profile, I cant pause or fast forward the vid.
I've attached the DNLA certificate which hopefully you can use to create a profile for the TL series.
Thanks.

Thanks,
Could you try with this tools : http://wiki.serviio.org/doku.php?id=device_sf ?

You can try adding this at the end of ./serviio/config/profiles.xml, just before the </Profiles> element
EDIT: change id="Tosh2012"
  Code:
   <Profile id="Tosh2012" name="Toshiba 40TL963B" extendsProfileId="1">
      <Transcoding>
         <Video targetContainer="mpeg" targetACodec="ac3" targetVCodec="mpeg2video">
            <Matches container="avi" />
         </Video>
      </Transcoding>
   </Profile>

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 8:57 am
by 888
Thanks Illico, much appreciated.
Unfortunately upnp tools dont detect my TV, so I cant attach the sink file.
I added that to my config - I had to rename "Toshiba2012" to "Tosh2012", as there seem to be a 10 character limit to that field.
Now it can play .avi files - I even added .flv and those can play as well.......awesome.
The only problem is that these two new formats cant pause, fast forward etc. - although I still have full control over .mkv .mp4 .mpg etc.
I've looked through the config file and cant work out why. I assume that .mkv and .mp4 file are being transcoded, as they are not supported directly via the network media player on the TV, and I was going to mimic the .mkv settings in the .avi setup to allow pausing, but I cant work it out.
I'm so impressed with the app, that I'm going to buy a licence right now. This app deserves to be supported.
thanks again for the very fast response.

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 1:04 pm
by Illico
888 wrote:Thanks Illico, much appreciated.
Unfortunately upnp tools dont detect my TV, so I cant attach the sink file.
I added that to my config - I had to rename "Toshiba2012" to "Tosh2012", as there seem to be a 10 character limit to that field.
Now it can play .avi files - I even added .flv and those can play as well.......awesome.

Ok.
888 wrote:The only problem is that these two new formats cant pause, fast forward etc. - although I still have full control over .mkv .mp4 .mpg etc.

With this new "Tosh2012" profile, mkv are delivered in native format.
888 wrote:I've looked through the config file and cant work out why. I assume that .mkv and .mp4 file are being transcoded, as they are not supported directly via the network media player on the TV, and I was going to mimic the .mkv settings in the .avi setup to allow pausing, but I cant work it out.

Not sure to understand...

With "Generic" profile or "Tosh2012" profile, mkv should be delivered in native format. Could you confirm that in tis way, mkv are ot supported ?

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 2:45 pm
by 888
Hi Illico,
I've attached a section out of the user manual from my tv, which seems to say that the only formats supported over DMS are MPEG-2 PS and MPEG-2 TS. Every other format is supported over the USB port on the tv.
This is what I could not understand in the serviio config file - I couldn't see transcoding for .mkv and mp4, yet they work fine using the default profile.
i'm at work right now, so I cant test the tv, but I am sure when I disable transcoding .mkv and .mp4 stop working. I'll test this when I get home.

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 2:53 pm
by Illico
888 wrote:This is what I could not understand in the serviio config file - I couldn't see transcoding for .mkv and mp4, yet they work fine using the default profile..

When you said "default profile", do you mean "Generic Profile" or default "Toshiba REGZA" profile ?

with "Generic Profile" --> mkv are delivered in native format (then with new Toshiba2012 profile too), so if you TV play mkv with these profiles, usermanual is ot uptodate.
with "Toshiba REGZA" --> mkv will be transcoded to mpegts/mpeg2video/ac3 format
<Video targetContainer="mpegts" targetACodec="ac3" targetVCodec="mpeg2video">
<Matches container="matroska" />
</Video>




The best pratice is to use "Generic profile" and try to play sample files in most popular formats then check if they play fine or not, if no, create and edit a profile that transcode this format to one supported by the TV.

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 3:30 pm
by 888
Sorry, I meant "generic profile". Everything seems to play well with this setting, except avi and flv. But with the "Tosh2012" addition these play now.
I think you are probably right, in that the manual is not up to date and has the wrong info.
Is there any way to get these transcoded avi files to pause - this is really the only problem I have now.
Thanks for all of the help, much appreciated.

Re: DLNA Device Support Information.

PostPosted: Tue Nov 27, 2012 7:51 pm
by Illico
Good.

Could you try with this profile:

  Code:
   <Profile id="Toshiba2012" name="Toshiba 40TL963B" extendsProfileId="1">
      <Transcoding>
         <Video targetContainer="mpegts" targetACodec="ac3" targetVCodec="mpeg2video">
            <Matches container="avi" />
            <Matches container="flv" />
         </Video>
      </Transcoding>
   </Profile>


I only change targetContainer="mpeg" to targetContainer="mpegts".