Page 1 of 1
Assign server to a subnet
Posted:
Thu Nov 19, 2020 5:44 pmby tcamuso
I have more than one subnet connected to my W10-pro workstation.
How can I tell which subnet serviio is connected to?
Can I assign serviio to a specific subnet?
Thanks.
Re: Assign server to a subnet
Posted:
Thu Nov 19, 2020 6:30 pmby atc98092
I assume you mean you have two separate network cards in your computer. Serviio by default will auto-select a card, and I believe it's based on which one loads first. But you can manually assign which network card Serviio uses using the Serviio console, at the bottom of the status page. Just click the Bound IP address box and select the desired NIC. You can also look at the Serviio log to see what IP address it has bound to.
Re: Assign server to a subnet
Posted:
Thu Nov 19, 2020 7:43 pmby tcamuso
atc98092 wrote:I assume you mean you have two separate network cards in your computer. Serviio by default will auto-select a card, and I believe it's based on which one loads first. But you can manually assign which network card Serviio uses using the Serviio console, at the bottom of the status page. Just click the Bound IP address box and select the desired NIC. You can also look at the Serviio log to see what IP address it has bound to.
Many thanks! Yes, two network cards, each connected to a different subnet.
I see now where I can bind to a given subnet at the bottom of the status page.
But where is the serviio log?
Re: Assign server to a subnet
Posted:
Thu Nov 19, 2020 8:08 pmby atc98092
On a Windows PC, the log is in the C:\Program Files\Serviio\log folder. It maxes the file at 5 MB, then starts a new log. The most current log has the .log suffix, while the next oldest will be .1, .2, etc.
Re: Assign server to a subnet
Posted:
Thu Nov 19, 2020 8:52 pmby tcamuso
Again, many thanks, Dan!