Serviio

I can not configure manually my ip adress. In the new version i can change the network adapter. The problem is it`s not suportted my virtual network adapter (PPP-Adapter, RAS Service).

Search for ListNic program on this forum and post the output of it

I think list nic work with unix. My system is windows. In Sevio Version 1.1 the network setting was 192.168.100.11.
With this adress i have no problems.

Here is my configuration with ipconfig /all (german language)


Windows-IP-Konfiguration

Hostname . . . . . . . . . . . . : xxxxx
Primäres DNS-Suffix . . . . . . . : xxxxx.local
Knotentyp . . . . . . . . . . . . : Broadcast
IP-Routing aktiviert . . . . . . : Ja
WINS-Proxy aktiviert . . . . . . : Nein
DNS-Suffixsuchliste . . . . . . . : xxxxx.local

PPP-Adapter RAS (Dial In) Interface:

Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : RAS (Dial In) Interface
Physikalische Adresse . . . . . . :
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
IPv4-Adresse . . . . . . . . . . : 192.168.100.11(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.255
Standardgateway . . . . . . . . . :
NetBIOS über TCP/IP . . . . . . . : Aktiviert

Ethernet-Adapter Network1:

Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Intel(R) Gigabit CT Desktop Adapter
Physikalische Adresse . . . . . . : xx-xx-xx-xx-xx-xx
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
IPv4-Adresse . . . . . . . . . . : 213.xxx.xxx.xx(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.247
IPv4-Adresse . . . . . . . . . . : 213.xxx.xxx.xx(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.247
IPv4-Adresse . . . . . . . . . . : 213.xxx.xxx.xx(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.247
IPv4-Adresse . . . . . . . . . . : 213.xxxxx(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.247
Standardgateway . . . . . . . . . : 213.xxx.xxx.xx
DNS-Server . . . . . . . . . . . : 213.xxx.xxx.xx
213.xxx.xxx.xx
NetBIOS über TCP/IP . . . . . . . : Aktiviert

Ethernet-Adapter Network2:

Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
Physikalische Adresse . . . . . . : xx-xx-xx-xx-xx-xx
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
Verbindungslokale IPv6-Adresse . : fe80::90r5:8a1e:4f4b:2b95%10(Bevorzugt)
Verbindungslokale IPv6-Adresse . : fe80::e677:f411:b309:14d8%10(Bevorzugt)
IPv4-Adresse . . . . . . . . . . : 192.168.100.5(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Standardgateway . . . . . . . . . :
DHCPv6-IAID . . . . . . . . . . . : 234845577
DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-16-E3-2E-D1-00-19-99-B9-91-2F

DNS-Server . . . . . . . . . . . : xxxx:xxxx:xxxx::xxxx:xxxx
192.168.100.5
NetBIOS über TCP/IP . . . . . . . : Aktiviert

Tunneladapter 6TO4 Adapter:

Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Microsoft-6zu4-Adapter #2
Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
IPv6-Adresse. . . . . . . . . . . : xxxx:xxxx:xxxx::xxxx:xxxx(Bevorzugt)
IPv6-Adresse. . . . . . . . . . . : xxxx:xxxx:xxxx::xxxx:xxxx(Bevorzugt)
IPv6-Adresse. . . . . . . . . . . : xxxx:xxxx:xxxx::xxxx:xxxx(Bevorzugt)
IPv6-Adresse. . . . . . . . . . . : xxxx:xxxx:xxxx::xxxx:xxxx(Bevorzugt)
Standardgateway . . . . . . . . . :
DNS-Server . . . . . . . . . . . : 213.xxx.xxx.xx
213.xxx.xxx.xx
NetBIOS über TCP/IP . . . . . . . : Deaktiviert

Listnic is a java program i wrote. Find it on this forum.

Ok , here the results:



ip: 127.0.0.1,
name: lo
display name: Software Loopback Interface 1
loopback: true
p2p: false
up: true
virtual: false
multicast: true
------------------------------
ip:
name: net0
display name: WAN Miniport (SSTP)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: net1
display name: WAN Miniport (L2TP)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: net2
display name: WAN Miniport (PPTP)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: ppp0
display name: WAN Miniport (PPPOE)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth0
display name: WAN Miniport (IPv6)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth1
display name: WAN Miniport (Network Monitor)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth2
display name: WAN Miniport (IP)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: ppp1
display name: RAS Async Adapter
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip: 192.168.100.5,
name: eth3
display name: Intel(R) 82574L Gigabit Network Connection
loopback: false
p2p: false
up: true
virtual: false
multicast: true
------------------------------
ip: 213.xxx.xxx.xx, 213.xxx.xxx.xx, 213.xxx.xxx.xx, 213.xxx.xxx.xx,
name: eth4
display name: Intel(R) Gigabit CT Desktop Adapter
loopback: false
p2p: false
up: true
virtual: false
multicast: true
------------------------------
ip:
name: net3
display name: Microsoft-ISATAP-Adapter #3
loopback: false
p2p: true
up: false
virtual: false
multicast: false
------------------------------
ip:
name: net4
display name: WAN Miniport (IKEv2)
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: net5
display name: Microsoft-ISATAP-Adapter
loopback: false
p2p: true
up: false
virtual: false
multicast: false
------------------------------
ip:
name: net6
display name: Microsoft-6zu4-Adapter #2
loopback: false
p2p: true
up: true
virtual: false
multicast: false
------------------------------
ip:
name: net7
display name: Microsoft-ISATAP-Adapter #2
loopback: false
p2p: true
up: false
virtual: false
multicast: false
------------------------------
ip:
name: eth5
display name: Intel(R) Gigabit CT Desktop Adapter-WFP LightWeight Filter-0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth6
display name: Intel(R) 82574L Gigabit Network Connection-QoS Packet Scheduler-00
00
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth7
display name: Intel(R) 82574L Gigabit Network Connection-WFP LightWeight Filter-
0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth8
display name: WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth9
display name: WAN Miniport (IP)-QoS Packet Scheduler-0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth10
display name: WAN Miniport (IPv6)-QoS Packet Scheduler-0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip: 192.168.100.11,
name: ppp2
display name: RAS (Dial In) Interface
loopback: false
p2p: false
up: true
virtual: false
multicast: true
------------------------------

And which of these are you using/missing?

This one is missing and this one i will using.

------------------------------
ip: 192.168.100.11
name: ppp2
display name: RAS (Dial In) Interface
loopback: false
p2p: false
up: true
virtual: false
multicast: true
------------------------------


This two i can select

------------------------------
ip:
name: eth5
display name: Intel(R) Gigabit CT Desktop Adapter-WFP LightWeight Filter-0000
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------
ip:
name: eth6
display name: Intel(R) 82574L Gigabit Network Connection-QoS Packet Scheduler-00
00
loopback: false
p2p: false
up: false
virtual: false
multicast: true
------------------------------

Currently i installed the 1.1. In this version i can set the ip adress manually and the programm work good. Maybe in the next Release you can set a additionally point to set a ip adress.

Try to change ServiioService.exe.vmoptions file to include this:



.. and restart the service / PC. Then check the logs if it binds to this IP address.

It`s not working. Here is the log entry:

2013-03-17 21:51:02,300 WARN [LocalAddressResolverStrategy] Cannot resolve IP address 192.168.100.11 -Xmx512m, will try other means


Then I go again to Version 1.1. Here is working log result:

2013-03-17 22:11:19,795 INFO [DiscoverySSDPMessageListener] Starting DiscoverySSDPMessageListener using interface ppp2 (RAS (Dial In) Interface) and address 192.168.100.11, timeout = 0

try this (each property on a new line):

Now it works.

Thanks for your help