FAQ  •  Register  •  Login

convert PS3 MS config file -> serviio config (Philips NetTV

<<

bassie127

Serviio newbie

Posts: 1

Joined: Mon Dec 27, 2010 9:02 am

Post Mon Dec 27, 2010 9:13 am

convert PS3 MS config file -> serviio config (Philips NetTV

Hi all,

I'm new to Serviio. I have have tried PS3 media server before with my Philips NetTV type 9604. This works, but the processor load is very high.
I would like to give Serviio a try.
I would like to create a new Serviio profile for my TV, because I cannot play all formats with the profiles already present. Especially

o "H264 - mpeg-4 avc (avc1) video with mpeg aac (mp4a) audio" and
o wmv files with WMV3 video and WMA2 audio

don't play (no video no audio).

I have added a new profile, but I've some problems getting the right info in it.
I do however have a config file for the PS3 media server that works.
Can anybody help me with converting this PS3 config file to a servioo config file?
The PS3 config file is below

Any help is welcome!

---
# ps3mediaserver renderer profile for Philips Aurea TV and Net TV
# Refer to PS3.conf for help
#
# The protocol string is (for mpeg2) :
# http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL

#--------------------
# General informations / detection # General informations / detection
# Added Aurea.png to ps3.jar with winrar
RendererName=Philips Aurea TV NetTV
RendererIcon=philips.png
# RendererIcon=bravia.png

# UserAgent: regular expression to detect the connected renderer
# Renderer name string: Allegro-Software-WebClient/4.61 DLNADOC/1.00
UserAgentSearch= Allegro-Software-WebClient

# Basic capabilities
Video=true
Audio=true
Image=true

##--------------------
## DLNA settings

##Use the DLNA feature seek by time and not by range
# SeekByTime=true
SeekByTime=false

##--------------------
## Transcoding/Muxing capabilities

##Transcode codecs for video and audio engines #
##currently supported: MPEGAC3 or WMV for video, PCM or MP3 for audio
TranscodeVideo=MPEGAC3
TranscodeAudio=PCM
## TranscodeAudio=MP3

##Use default DVD buffer size: false = greater bitrate and faster encoding,
##but can generate incompatible videos, depends of your media renderer
##DefaultVBVBufSize=false
DefaultVBVBufSize=true

##Muxing capabilities: Does the media renderer supports H264 and MPEG2 in a mpegts file ?
## MuxH264ToMpegTS=true
MuxH264ToMpegTS=false

##Does the media renderer supports DTS in a mpeg file ?
# MuxDTSToMpeg=false
MuxDTSToMpeg=true

##Does the media renderer supports DTS wrapped into LPCM in a mpeg file ?
# WrapDTSIntoPCM=true
WrapDTSIntoPCM=false

##Does the media renderer supports LPCM in a mpeg file ?
MuxLPCMToMpeg=true
## MuxLPCMToMpeg=false

##Maximum bitrate supported by the media renderer (0=unlimited)
MaxVideoBitrateMbps=0

##Max Width and Height supported by the media renderer (0=unlimited)
MaxVideoWidth=1920
MaxVideoHeight=1080

##Does the media renderer supports only H264 L4.1 at most ?
## H264Level41Limited=true

#Does music files need to be resampled at 44.1kHz?
TranscodeAudioTo441kHz=false

#Does the client need to receive transcoded video with minimal delay ? (Useful when the client has a small timeout delay)
TranscodeFastStart=true

#Size of the transcoded file (unknown length) sent to the renderer (could determine browsing failure/success)
#Possible values:
# -1: Specific value working with the PS3, means perfect transcoding and copying support (it's against the dlna spec though)
# 0: size attribute is NOT sent to the renderer (defaut value if this parameter isn't used)
# 100000000000: 100Gb, if you want to be sure that the media file is not cutted before the end ?
TranscodedVideoFileSize=100000000000

##--------------------
## Misc Files
##
## If you want to apply a specific extension for your transcoded files:
# UseSameExtension=mpg

## Mime types transforms (oldmime=newmime|olemime2=newmime2|…)
# MimeTypeChanges=video/avi=video/x-divx
# MimeTypesChanges=video/mp4=video/mpeg

## Extensions management: no need to put something here, as the server's default configuration is tuned for ps3
## What extensions are forcefully streamed as is (and not transcoded)
StreamExtensions=

## What extensions are forcefully transcoded
# Needed for Philips Aurea that can only handle mpg, mp3
# Not needed for Philips NetTV that can handle many formats natively *****I have a NetTV****
TranscodeExtensions=avi,wmv,mkv,wmv,ts,m2ts,tp,iso,mp4,mov
<<

Illico

User avatar

DLNA master

Posts: 4649

Joined: Fri Jul 23, 2010 8:08 am

Location: France

Post Mon Dec 27, 2010 9:36 am

Re: convert PS3 MS config file -> serviio config (Philips NetTV

Please provide the GetProtocolInfo sink result: viewtopic.php?f=5&t=19
We will help you...
Illico
Sony 2010 KDL-46EX501 | BDP-S373 | SMP-N100 | Windows 8-i7 | Network DD HD-CE1.5TLU2 | Livebox2-UHD86 | ServiiDroid | ServiiGo | BubbleUPnP
Serviio beta tester - Moderator

Return to Transcoding

Who is online

Users browsing this forum: No registered users and 2 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.