Serviio

First of all, let me express my gratitude for a wonderful application. It runs well and integrates extremely well with my TV.

I have a Sharp Aquos LC-40LX3. The DLNA certificate is available here:
http://certification.dlna.org/certs/REG40657808.pdf.

According to this, it supports the following:
Image: JPEG_MED, JPEG_SM
Audio: LPCM, MP3
Video: MPEG_PS_NTSC, MPEG_TS_JP_T

This is a Japanese model since I live in Japan.

With a bit of experimentation and trial and error, I have created a minimal, basic profile for this.


This seems to be working fine for me.

Thanks goes to another thread (http://forum.serviio.org/viewtopic.php?f=5&t=2341) which helped me with the detection. With this setup, it is automatically detected upon service startup. Just like there, the Intel Device Spy does not detect the TV.

I had a bit of trouble with the Transcoding element. Since the device supports MPEG_TS_JP_T and MP3, I spent a bit of time trying to configure it with targetContainer="mpegts" and targetACodec="mp3". But no combinations worked. I must not understand the correspondance between the DLNA certificate and the profile. While it is working, is this really the optimal setup?

Also, I reviewed the documentation and examples, but I am unsure if I need to re-define any MediaFormatProfile elements.

This profile is still fairly basic, but I would appreciate any comments, optimizations, or suggestions.

Please feel free to reuse this profile as desired. I would assume that this would work for the other LX3 models as well: LC-46LX3, LC-52LX3, and LC-60LX3.

Regards.

you won't need DeviceDescription element.

You're transcoding all avi's to mpeg2 which should be served as MPEG_PS_NTSC and MPEG_PS_PAL. You sere the avi's don't play natively? Sometimes some files can be played even though they are not 'officially' supported.