Acronis Backup and New Serviio Service
I upgrade from Serviio 1.5.2 to 1.6x and since then my Acronis Backup on that Machine fails. Now I know everyone is going to tell me this is not possible, but I have did quite a bit of testing and this is what I have found.
System - Backup
AMD FX-6300 Processor
8 GM DDR 3 1600 Ram
1 SATA 320 GB (OS) Drive
4 SATA 6GB 2TB 7200 RPM Drives (1 drive for each Computer)
1 SATA 6GB 4TB 7200 RPM Drive (Serviio - Backup Drive)
1 SATA 6GB 1TB 7200 RPM Drive (SWAP and TEMP Drive)
System - Serviio Media Server
AMD FX-6300 Processor
8 GM DDR 3 1600 Ram
1 SATA 80 GB (OS) Drive
1 SATA 6GB 1TB 7200 RPM Drives (Audio and Video)
1 SATA 6GB 1TB 7200 RPM Drive (Misc - Backup Drive)
1 SATA 6GB 500GB 7200 RPM Drive (SWAP and TEMP Drive)
The issue with backup only started after the upgrade from 1.5.2 to 1.6x. No Hardware issue all drive passed Smart and Hard Drive Diagnostic on both compuyers, drives are 1 year or less old, no event view errors or warning on either machine.
I reformat all drive on the Serviio Media Server and restore back prior to the upgrade from the backup re-ran the backup and the Acronis Backup completes successfull, upgraded to 1.6 and the backup fails after 22 hours, prior to that the backup only took 4 to 6 hours to complete (668 GB of data). the funny part (well not funny just interesting) is that if I disable the Serviio Service and kill all the FFMGEG - 32 task the backup completes with 1.6 install but not active or running. The next part is Serviio is running on the OS Drive and my Media is on a completely separate drive. Since I do not know this and need to ask, Does the Serviio Service Lock the Drive?
I have had to manually run my backup for that machine by disabling serviio, but that is not a very good option so I have had to revert back to version 1.5.2 so that my backups run.
So what I need to know is
Does the Serviio Service Lock the Drive?
Can I use Task Scheduler to Stop Serviio and it Process during the night so backup can run and restart after backup completes?
Is this an issue anyone else has come across with version 1.6?
Thanks in advance if there is no solution (will reverting back to 1.5.2 fixes the issue)
Panasonic tc-p42x3 Plasma, Samsung BDP-3700, Sony BDP-BX2, Roku N1100, Roku XS, Roku 4, Yamaha RX-v661, Yamaha RX-V757. Primary server: Intel 2 - XEON 3450, 32 gig ram, Windows Server 2008 R2, 48 TB hard drive space | Secondary Server: AMD FX-6300, 32 GB RAM, Windows Server 2008 R2, 26 TB Hard Drive Space | AMD-FX 4130/6300/8350, Intel i5-3450