V1.6.1 doesn't work om W32
9 posts
• Page 1 of 1
I'm attempting to re-install V1.5 now. Very disappointing! See attached image.
Re: V1.6.1 doesn't work om W32
What version of Windows? 32 or 64 bit?
Dan
LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram
HOWTO: Enable debug logging HOWTO: Identify media file contents
LG NANO85 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 16 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram
HOWTO: Enable debug logging HOWTO: Identify media file contents
Re: V1.6.1 doesn't work om W32
32bit XP Pro. Please don't tell me this only runs on 64bit W7+. If so, I'll keep this vision, even if I have to pit up with the "Upgrade nag".
Re: V1.6.1 doesn't work om W32
will reinstall tomorrow.
Re: V1.6.1 doesn't work om W32
It works. Only the console needs W7 and above. http://serviio.org/component/content/article?id=21#q20
Petr
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Re: V1.6.1 doesn't work om W32
Yes, it works just fine. Sorry i couldn't get back to you sooner. That console said "Not a win32 application". I have to wonder about a 32bit W7? Doesn't matter for me though. My wife has a 64bit W7 laptop.
This XP box isn't really powerful to allow the service come up at boot-up, or keep running while doing other intensive work, So, i always set the service to "Manual". I used to have a batch that started the service, slept 3 seconds, and started the console in the tray. The tray icon was a good indication that Serviio was running and gave me a handy way to stop it when i needed more machine. Right now I have a little batch file to "NET START Serviio" and I'm writing a little routine to put an icon in the tray that lets me "See' it's running, and allows me to stop it.
Also, my windows firewall has two Serviio exceptions. Do they both have to be open to the entire Internet, or can I limit the scope to my LAN (Subnet)?
This XP box isn't really powerful to allow the service come up at boot-up, or keep running while doing other intensive work, So, i always set the service to "Manual". I used to have a batch that started the service, slept 3 seconds, and started the console in the tray. The tray icon was a good indication that Serviio was running and gave me a handy way to stop it when i needed more machine. Right now I have a little batch file to "NET START Serviio" and I'm writing a little routine to put an icon in the tray that lets me "See' it's running, and allows me to stop it.
Also, my windows firewall has two Serviio exceptions. Do they both have to be open to the entire Internet, or can I limit the scope to my LAN (Subnet)?
Re: V1.6.1 doesn't work om W32
Yes, the console wrapper works on Win 7 32 bit (that's what I run).
Shameless plug - have a look at my WinHelper app (see signature) - allows start/stop of the server from the icon, sleep management and a few other things. The icon doesn't change when the server is running (you need to hover your mouse over the icon which will then tell you) but that sounds like an easy thing for a future release.
The firewall rules should be able to limit based on IP addresses (LAN vs everyone else), but that's not what's needed. It's your router that controls access from the internet - if you do not have a port forwarded in your router (and the "Automatically configure your router" is not ticked on the Remote tab of Serviio Console) then Internet users will not get access. This is the better way of denying access as it blocks the bad guys before they get anywhere near you LAN.
Shameless plug - have a look at my WinHelper app (see signature) - allows start/stop of the server from the icon, sleep management and a few other things. The icon doesn't change when the server is running (you need to hover your mouse over the icon which will then tell you) but that sounds like an easy thing for a future release.
The firewall rules should be able to limit based on IP addresses (LAN vs everyone else), but that's not what's needed. It's your router that controls access from the internet - if you do not have a port forwarded in your router (and the "Automatically configure your router" is not ticked on the Remote tab of Serviio Console) then Internet users will not get access. This is the better way of denying access as it blocks the bad guys before they get anywhere near you LAN.
Re: V1.6.1 doesn't work om W32
i see you put a lot of work into that. I'll check it out better tomorrow. Right now, i've got this VB6 thing working fine.
1) The batch file starts the service, and installs the tray icon.
2) Left click the Icon to launch the browser Serviio console.
3) Right click for a context menu to either launch the console or Stop Serviio and unload the icon.
Does what i need for now i think.
Now if I could find out what's going on with CBS we'd be good to go. The URLs offer the browser from 5 to 15 of the latest shows free. Serviio either comes up with an empty list or offers shows from 2015.
1) The batch file starts the service, and installs the tray icon.
2) Left click the Icon to launch the browser Serviio console.
3) Right click for a context menu to either launch the console or Stop Serviio and unload the icon.
Does what i need for now i think.
Now if I could find out what's going on with CBS we'd be good to go. The URLs offer the browser from 5 to 15 of the latest shows free. Serviio either comes up with an empty list or offers shows from 2015.
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 27 guests