Sun Mar 04, 2012 3:42 pm by npuser
kubbaz - Here is what you could do in windows environment. Add 'Tcpip' and/or 'NetBT' services as dependencies to serviio service. This does require you to change registry which could potentially cause problem if you are not careful. However, if setup correctly, this approach is a fail safe method than that of delay start. Setting up a Tcpip dependency on serviio service tells windows not to start serviio until Tcpip (or NetBT = NetBios over TCPIP) is ready.
Procedure to add dependency:
1. Start regedit
2. Go to - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Serviio
3. Then click Add Value
4. Create a new value name "DependOnService" (without the quotation marks) with a data type of REG_MULTI_SZ, and then click OK.
5. When the Data dialog box appears, type Tcpip (case sensitive, one entry for each line if you are adding multiple dependencies), and then click OK.
If the everything entered correctly, your serviio service dependency should look like attached picture.
Note: I also have .reg file with encoded dependonservice key with this post. The .reg file only applies to windows 7 64bit.
WARNING !!! DO NOT APPLY .REG FILE DIRECTLY TO YOUR PC. THE FILE IS FOR YOUR REFERENCE ONLY.
- Attachments
-
- Serviio-Dependency.reg.txt
- (350 Bytes) Downloaded 677 times
-
- Serviio-Tcpip-Dependency.JPG (36.84 KiB) Viewed 19814 times