FAQ  •  Register  •  Login

Crash on TV UE40ES8000S for flv files

<<

lemoineo

Serviio newbie

Posts: 1

Joined: Sun Jun 23, 2013 7:15 am

Post Sun Jun 23, 2013 7:37 am

Crash on TV UE40ES8000S for flv files

Hello
My pc is on Ubuntu and serviio 1.2.1
With .avi files, it is ok
But with the .flv, the tv process (the little icon arrow) is blocked and
after many seconds, the smart-tv crash and reboot (without message)
the profile extract from the profiles.conf is clean from install
  Code:
   <Profile id="2" name="Samsung TV (B-series)" extendsProfileId="1">
        <ContentDirectoryMessageBuilder>org.serviio.upnp.service.contentdirectory.SamsungDLNAMessageBuilder</ContentDirectoryMessageBuilder>
        <ResourceTransportProtocolHandler>org.serviio.upnp.protocol.http.transport.SamsungWiseLinkProtocolHandler</ResourceTransportProtocolHandler>
        <Detection>
            <UPnPSearch>
                <FriendlyName>^TV$</FriendlyName>
                <ModelName>Samsung DTV DMR</ModelName>
                <ModelNumber>1\.0</ModelNumber>
            </UPnPSearch>   
        </Detection>
        <DeviceDescription>
           <ExtraElements>
              &lt;sec:ProductCap&gt;smi,getMediaInfo.sec,getCaptionInfo.sec&lt;/sec:ProductCap&gt;
            &lt;sec:X_ProductCap&gt;smi,getMediaInfo.sec,getCaptionInfo.sec&lt;/sec:X_ProductCap&gt;
           </ExtraElements>
        </DeviceDescription>
        <MediaFormatProfiles>
            <MediaFormatProfile mime-type="video/x-mkv">MATROSKA</MediaFormatProfile>
            <MediaFormatProfile mime-type="video/x-msvideo" name="">AVI</MediaFormatProfile>
        </MediaFormatProfiles>
        <H264LevelCheck>FILE_ATTRIBUTES</H264LevelCheck>
        <Transcoding>
           <!-- Transcode all h264 video with HIGH/MAIN > Level 4.1 on MPEG-TS stream with MPEG2VIDEO and ac3 audio transcoding -->
         <Video targetContainer="m2ts" targetVCodec="mpeg2video" targetACodec="ac3" aBitrate="192">
            <Matches container="*" vCodec="h264" profile="high_10" />
            <Matches container="*" vCodec="h264" profile="high" levelGreaterThan="4.2" />
            <Matches container="*" vCodec="h264" profile="main" levelGreaterThan="4.2" />
         </Video>
            <!-- transcode MKV with DST/FLAC audio to AC3, remux into mpeg2ts -->
            <!-- transcode H264 MP4 files with LPCM audio -->
            <Video targetContainer="m2ts" targetACodec="ac3">
                <Matches container="matroska" vCodec="h264" aCodec="dca" />         
                <Matches container="mp4" vCodec="h264" aCodec="lpcm" />
                <Matches container="matroska" vCodec="h264" aCodec="flac" />
                <Matches container="matroska" vCodec="h264" aCodec="vorbis" />
                <Matches container="matroska" vCodec="h264" aCodec="truehd" />
                <Matches container="mpegts" vCodec="h264" aCodec="truehd" />
                <Matches container="matroska" vCodec="vc1" />
                <Matches container="avi" vCodec="h264" />
                <Matches container="mpegts" aCodec="mp2" />
                <Matches container="flv" vCodec="h264" />
                <Matches container="ogg" vCodec="mpeg4" />
                <Matches container="3gp" aCodec="amrnb" />   
                <Matches container="wtv" vCodec="h264" />
            </Video>
            <!-- transcode unsupported codec/container combinations into mpeg2ts -->
            <Video targetContainer="m2ts" targetACodec="ac3" targetVCodec="mpeg2video">
                <Matches container="asf" vCodec="wmv2" />
                <Matches container="matroska" vCodec="mpeg2video" />
                <Matches container="matroska" vCodec="vp8" />
                <Matches container="avi" vCodec="mjpeg" />
                <Matches container="avi" vCodec="dvvideo" />
                <Matches container="mp4" vCodec="dvvideo" />
                <Matches container="mp4" vCodec="mjpeg" />
                <Matches container="flv" />
                <Matches container="ogg" />
                <Matches container="rm" />               
            </Video>
            <!-- For dvr-ms files force mpeg2video transcoding to fix monotone timestamps problems-->
            <Video targetContainer="m2ts" targetACodec="ac3" forceVTranscoding="true">
                <Matches container="asf" vCodec="mpeg2video" />
                <Matches container="asf" vCodec="mpeg1video" />
            </Video>
            <Video targetContainer="m2ts">
                <Matches container="wtv" />
            </Video>
            <!-- transcode audio only for wmv with wmapro -->
            <Video targetContainer="asf" targetACodec="ac3" aBitrate="256">
                <Matches container="asf" aCodec="wmapro" />
            </Video>
            <Audio targetContainer="lpcm">
                <Matches container="asf" />
                <Matches container="mp4" />
                <Matches container="flac" />
                <Matches container="ogg" />
                <Matches container="adts" />
            </Audio>
        </Transcoding>
        <OnlineTranscoding>
         <Video targetContainer="mpeg" targetVCodec="mpeg2video" targetACodec="ac3" aBitrate="384">
            <Matches container="mp4"/>
         </Video>
      </OnlineTranscoding>
        <AutomaticImageRotation>true</AutomaticImageRotation>
        <LimitImageResolution>false</LimitImageResolution>
        <Subtitles>
         <SoftSubs mime-type="smi/caption" />
      </Subtitles>
    </Profile>


May i change anything to play flv ?
Thanks
Olivier
<<

zip

User avatar

Serviio developer / Site Admin

Posts: 17215

Joined: Sat Oct 24, 2009 12:24 pm

Location: London, UK

Post Mon Jun 24, 2013 1:07 pm

Re: Crash on TV UE40ES8000S for flv files

post ffmpeg -i of the file

Return to Samsung

Who is online

Users browsing this forum: No registered users and 13 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.