[SOLVED] BRAVIA AVI problem

Hello, I have successfully installed serviio on WinXP computer for using with my new BRAVIA KDL40EX725.
It works well but there are problems with some files. I think that is also normal, there are to much different methods to encode.
But can you pleas take a look at this fmmpeg -i output ? TV says it cannot play.
--------------
Input #0, avi, from 'F:\tmp\File01.avi':
Metadata:
encoder : VirtualDubMod 1.5.4.1 (build 2178/release)
IAS1 : English
IAS2 : Deutsch
Duration: 00:42:23.60, start: 0.000000, bitrate: 1154 kb/s
Stream #0:0: Video: mpeg4 (Simple Profile) (XVID / 0x44495658), yuv420p, 528
x400 [SAR 1:1 DAR 33:25], 25 tbr, 25 tbn, 25 tbc
Stream #0:1: Audio: mp3 (U[0][0][0] / 0x0055), 48000 Hz, stereo, s16, 32 kb/s
Stream #0:2: Audio: mp3 (U[0][0][0] / 0x0055), 48000 Hz, stereo, s16, 64 kb/s
--------------
Streaming the file is not a problem, I have tested it on my Andoid tablet with Upnplay. It starts the Rockplayer, this asks which audio stream should be used and then plays the file.

For testing I had then removed audio stream number 1 with VirtualDubMod (direct stream copy), but TV also not plays the result file.
I think serviio thinks that the TV can play it and does not transcode it, is so ?

P.S. Now have read Thread 4585 and have check with avi fourcc changer, but one field is "xvid" and the other "XVID", hope there is no upcase/lowercase sensitivity.

[WildRushSykes]

Im not sure if using virtaldubs direct stream option to remove the 1 audio track would of worked as it would of just copied both audio tracks instead but could be wrong. What i would of done is used virtaldubmod to save audio track 2 as a wav file then used virtualdub and set it to direct stream video and have no audio track then remux track 2 using the add audio file option. But i like doing things the long way

[Illico]

what is your ffmpeg version ?

Could you also provide MediaInfo tools result?

Mediainfo:
General
Complete name : F:\tmp\File01.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 350 MiB
Duration : 42mn 23s
Overall bit rate mode : Variable
Overall bit rate : 1 154 Kbps
Writing application : VirtualDubMod 1.5.4.1 (build 2178/release)
Writing library : VirtualDubMod build 2178/release

Video
ID : 0
Format : MPEG-4 Visual
Format profile : Simple@L3
Format settings, BVOP : 1
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Custom
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 42mn 23s
Bit rate : 910 Kbps
Width : 528 pixels
Height : 400 pixels
Display aspect ratio : 4:3
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.172
Stream size : 276 MiB (79%)
Writing library : XviD 1.0.3 (UTC 2004-12-20)

Audio #1
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 111 Kbps
Nominal bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 33.5 MiB (10%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame)
Interleave, preload duration : 166 ms
Writing library : LAME3.97
Encoding settings : -m j -V 4 -q 2 -lowpass 17 --abr 128
Language : English

Audio #2
ID : 2
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 42mn 23s
Bit rate mode : Variable
Bit rate : 112 Kbps
Nominal bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 34.1 MiB (10%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame)
Interleave, preload duration : 345 ms
Writing library : LAME3.97
Encoding settings : -m j -V 4 -q 2 -lowpass 17 --abr 128
Language : German

ffmpeg I have the with serviio shipped version 0.6.1, I have not tried to update it at this moment. It is of Dec 13 2011 20:46:11.

Have found a solution, thanks @WildRushSykes for the hint.
Avidemux is the right program for doing the job good and fast.
1) Load the file, confirm messages about rebuilding map.
2) Choose in Audio menu the main track.
3) Save the new file.
Ready.

Howsoever it would be good to have an option in serviio to advice it to transcode files with more than one audio stream und preselect the language for automatically choose the correct stream, a topic for the wish list...

[Illico]

Good tips and well job.