Ask a profile for Panasonic GW30 and play .ts with serviio

Hallo,

I have a Panasonic GW30 Plasma Display:

[User-Agent: Panasonic MIL DLNA CP UPnP/1.0 DLNADOC/1.50,Host: 192.168.125.201:8895,X-PANASONIC-Registration: VFYgIFRvZgAAAAAAAAAAAAAAAAAAAAAAAAA=,X-PANASONIC-DMP-Profile: MPEG_PS_PAL JPEG_SM PV_DIVX_DIV3 PV_DIVX_DIV4 PV_DIVX_DIVX PV_DIVX_DX50 PV_DRM_DIVX_DIV3 PV_DRM_DIVX_DIV4 PV_DRM_DIVX_DIVX PV_DRM_DIVX_DX50])

Because I 'm new in UPNP I'm not shure which profile is to use and ask for every hint.
I use the panasonic built in profiles to make some tests.
Is one of them fully compatible to the GW30, or must i edit some of the parameters?

My biggest Problem is to play/transcode .ts files from an old dbox2.
This DVB-C receiver produce .ts files which have some not estimated parameters in the header:
Some mediaplayer decode them and some not :-\

An example for such a file:
ffmpeg -i Test.ts
ffmpeg version N-42368-gbf53863 Copyright (c) 2000-2012 the FFmpeg developers
built on Jul 10 2012 03:40:45 with gcc 4.6.3
libavutil 51. 64.100 / 51. 64.100
libavcodec 54. 33.100 / 54. 33.100
libavformat 54. 15.102 / 54. 15.102
libavdevice 54. 1.100 / 54. 1.100
libavfilter 3. 1.100 / 3. 1.100
libswscale 2. 1.100 / 2. 1.100
libswresample 0. 15.100 / 0. 15.100
[mp1 @ 0128FC80] Header missing
[mpeg2video @ 01296280] mpeg_decode_postinit() failure
[mp1 @ 0128FC80] Header missing
[mpeg2video @ 01296280] mpeg_decode_postinit() failure
[mp1 @ 0128FC80] Header missing
[mpeg2video @ 01296280] mpeg_decode_postinit() failure
[mp1 @ 0128FC80] Header missing
[mpeg2video @ 01296280] mpeg_decode_postinit() failure
Last message repeated 1 times
[mp1 @ 0128FC80] Header missing
Last message repeated 2 times
[mpeg2video @ 01296280] mpeg_decode_postinit() failure
[mp1 @ 0128FC80] Header missing
Last message repeated 118 times
[mpegts @ 0181BBA0] max_analyze_duration 5000000 reached at 5024000
[mpegts @ 0181BBA0] decoding for stream 1 failed
[mpegts @ 0181BBA0] Could not find codec parameters (Audio: mp1, 0 channels, s16
)
[mpegts @ 0181BBA0] PES packet size mismatch
Last message repeated 3 times
Input #0, mpegts, from 'Test.ts':
Duration: 01:07:50.92, start: 76061.221856, bitrate: 6527 kb/s
Stream #0:0[0x7d]: Audio: ac3, 48000 Hz, stereo, s16, 448 kb/s
Stream #0:1[0x82]: Audio: mp1, 0 channels, s16
Stream #0:2[0x6e]: Video: mpeg2video (Main), yuv420p, 720x576 [SAR 64:45 DAR 16:9], 15000 kb/s, 25.84 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:3[0x78]: Audio: mp2, 48000 Hz, stereo, s16, 256 kb/s
Stream #0:4[0x79]: Audio: mp2, 48000 Hz, mono, s16, 128 kb/s

Have somebody an idea how to configure a profile to play this files?

And a last question: How can I log the transcoding-processs.
I found some hints in the forum to edit the output parameters for the logfile, but nothig special for the transcoding-log.

regards
nt