FAQ  •  Register  •  Login

Samsung 48h6400 TV and SERVIIO

<<

kmetek

Serviio newbie

Posts: 6

Joined: Thu May 24, 2012 5:45 pm

Post Wed May 27, 2020 12:01 pm

Samsung 48h6400 TV and SERVIIO

Hope it's not already been asked.

I installed SERVIIO on my PC in one room, TV is in other....over WIFi connection - router it works but drops and having problems playing movies/tv series.

So i purchased POWERLINE adapter, connected to router and then 2nd powerline adapter in TV Room directly to TV....Internet connection etc works, but SERVIIO gets loss/it's not in MENU/SOURCE anymore....

My primary PC is connected to router, shared maps sorted etc.....why work over WIFI and not over POWERLINE/LAN, makes no sense?

Thank you.
<<

atc98092

User avatar

DLNA master

Posts: 4054

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed May 27, 2020 1:56 pm

Re: Samsung 48h6400 TV and SERVIIO

I've never seen an powerline setup, so I have no idea if it has any sort of interface that you can log into for configuration. It sounds like it's not passing the uPnP packets, which is how devices advertise themselves on the network. Sometimes they are labeled differently, with a phrase that ends with "cast".
Dan

Samsung NU7100 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 8 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

kmetek

Serviio newbie

Posts: 6

Joined: Thu May 24, 2012 5:45 pm

Post Wed May 27, 2020 3:25 pm

Re: Samsung 48h6400 TV and SERVIIO

well there must be some kind of solutions :)
<<

atc98092

User avatar

DLNA master

Posts: 4054

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed May 27, 2020 4:01 pm

Re: Samsung 48h6400 TV and SERVIIO

I did a quick search, and powerline is supposed to support uPnP. So the next question is your configuration. Does your TV still have an IP address in the same range as the Serviio PC? That means the first three segments of the IP address are the same, such as 192.168.0.x, with x being a different number for each device.
Dan

Samsung NU7100 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 8 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

kmetek

Serviio newbie

Posts: 6

Joined: Thu May 24, 2012 5:45 pm

Post Wed May 27, 2020 4:16 pm

Re: Samsung 48h6400 TV and SERVIIO

I bought this powerline SET

https://www.tp-link.com/en/home-network ... 4010p-kit/

will look into it tomorrow :)

Yes, TV is on same IP range....I see it on my router configurarion page.
<<

atc98092

User avatar

DLNA master

Posts: 4054

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed May 27, 2020 5:05 pm

Re: Samsung 48h6400 TV and SERVIIO

I have sworn off TP-Link for any future purchases. I have a router that supports 802.11ac, and the fastest WiFi speed I can get through it is about 75 Mbps. It's worthless, and while I've had some success with the brand, it's just not very high quality. Based on my personal experience, I wouldn't be surprised if they aren't passing uPnP as the standard requires.

If you can ping the TV from the Serviio computer, that shows good TCP/IP connectivity. But if the powerline adapters aren't passing all protocols as they should, that would explain why Serviio isn't appearing.
Dan

Samsung NU7100 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 8 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

kmetek

Serviio newbie

Posts: 6

Joined: Thu May 24, 2012 5:45 pm

Post Wed May 27, 2020 6:20 pm

Re: Samsung 48h6400 TV and SERVIIO

I can ping my TV from SERVIIO's PC.

Pinging 192.168.1.191 with 32 bytes of data:
Reply from 192.168.1.191: bytes=32 time=1ms TTL=64
Reply from 192.168.1.191: bytes=32 time=1ms TTL=64
Reply from 192.168.1.191: bytes=32 time=1ms TTL=64
Reply from 192.168.1.191: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.1.191:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms

this is over WIFI.

:)
<<

atc98092

User avatar

DLNA master

Posts: 4054

Joined: Fri Aug 17, 2012 10:22 pm

Location: Washington (the state)

Post Wed May 27, 2020 6:30 pm

Re: Samsung 48h6400 TV and SERVIIO

I meant being able to ping it through the powerline connection.
Dan

Samsung NU7100 4K TV, Samsung JU7100 4K TV, Sony BDP-S3500, Sharp 4K Roku TV, Insignia Roku TV, Roku Ultra, Premiere and Stick, Nvidia Shield, Yamaha RX-V583 AVR.
Primary server: Intel i5-6400, 8 gig ram, Windows 10 Pro, 22 TB hard drive space | Test server Windows 10 Pro, AMD Phenom II X4 965, 8 gig ram

HOWTO: Enable debug logging HOWTO: Identify media file contents
<<

kmetek

Serviio newbie

Posts: 6

Joined: Thu May 24, 2012 5:45 pm

Post Wed May 27, 2020 7:42 pm

Re: Samsung 48h6400 TV and SERVIIO

will try that tomorrow.

Return to Samsung

Who is online

Users browsing this forum: No registered users and 9 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.