FAQ  •  Register  •  Login

Serviio Stops Working After Computer Restart

<<

mox8682

Serviio newbie

Posts: 2

Joined: Tue Oct 02, 2012 12:44 pm

Post Tue Oct 02, 2012 1:09 pm

Serviio Stops Working After Computer Restart

I have been Using Serviio for about 2 months now and I love it. I was using it on my older gateway computer running Windows 7 Ultimate (32 bit) with an external 2 TB drive (storage for all my media capable of USB 3.0 but connected to a 2.0 port). Serviio worked great automatically adding the new media to the server, I could restart the PC and Serviio would start up automatically and everything worked beautifully. I then upgraded my computer a new machine running Windows 7 Ultimate (64 bit) using the same 2 TB drive (now connected to a USB 3.0 port) and I installed Serviio again and everything was working great. After I restarted my computer the Serviio console would run and the server would start but my Samsung C750 could no longer see the Serviio server. I uninstalled Serviio and re-installed it (re-mapping it to the external drive again) and everything worked properly. If I restart the computer I have the same issue, if I just put it to sleep no issue. Does anyone have any suggestions for why it worked properly on my old PC but not the new?
<<

zip

User avatar

Serviio developer / Site Admin

Posts: 17215

Joined: Sat Oct 24, 2009 12:24 pm

Location: London, UK

Post Wed Oct 03, 2012 6:27 pm

Re: Serviio Stops Working After Computer Restart

try to bind it to the PC's IP address
<<

mox8682

Serviio newbie

Posts: 2

Joined: Tue Oct 02, 2012 12:44 pm

Post Thu Oct 04, 2012 7:19 pm

Re: Serviio Stops Working After Computer Restart

That did not seem to have any effect
<<

zip

User avatar

Serviio developer / Site Admin

Posts: 17215

Joined: Sat Oct 24, 2009 12:24 pm

Location: London, UK

Post Fri Oct 05, 2012 4:26 pm

Re: Serviio Stops Working After Computer Restart

enable detailed logging, restart the PC and post the log please
<<

mukkie

Serviio newbie

Posts: 1

Joined: Tue Oct 16, 2012 7:27 am

Post Tue Oct 16, 2012 7:29 am

Re: Serviio Stops Working After Computer Restart

Hi,

Did anything come from this? I have the same problem with a PS3 trying to see the server.

Cheers
Mark
<<

Ianj

Serviio newbie

Posts: 4

Joined: Thu Oct 18, 2012 3:07 pm

Post Thu Oct 18, 2012 3:19 pm

Re: Serviio Stops Working After Computer Restart

Hi,

I have a similar problem.

I have been using Serviio for about 2 months now and it has worked flawlessly. Two days ago however the allshare device stopped showing on my TV (UA46D6600) the serviio server is running and the console shows a connection to my TV (green dot next to TV ip address in status) it is not showing on the TV.

I know the TV is connected to my PC as it sees the PC and can access the Media Player DLNA service and I can ping the TV but this is so inferior when compared to serviio.

If there are any suggestions I would be very grateful.

Cheers,
Ian.
<<

zip

User avatar

Serviio developer / Site Admin

Posts: 17215

Joined: Sat Oct 24, 2009 12:24 pm

Location: London, UK

Post Tue Oct 23, 2012 4:52 pm

Re: Serviio Stops Working After Computer Restart

<<

Jgraycpa1

Serviio newbie

Posts: 5

Joined: Fri Jul 26, 2013 12:19 am

Post Fri Jul 26, 2013 12:30 am

Re: Serviio Stops Working After Computer Restart

I am having the same problem. After rebooting my computer, I have to go to services and restart the serviio service in order for it to work. Is there anything I can do to avoid having to manually start the service every time I reboot the computer? Would delaying the start of the service or perhaps changing the login settings for the service help?

I am running serviio version 1.2.1 on a 64 bit Windows 7 Enterprise version computer.
Last edited by Jgraycpa1 on Fri Jul 26, 2013 4:14 am, edited 1 time in total.
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Fri Jul 26, 2013 3:36 am

Re: Serviio Stops Working After Computer Restart

You can delay the Serviio service from starting until other components are loaded by making the service dependant on the HTTP service.
To do this, from an elevated command prompt (run cmd.exe as an Administrator) type : sc config Serviio depend= HTTP
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

Jgraycpa1

Serviio newbie

Posts: 5

Joined: Fri Jul 26, 2013 12:19 am

Post Fri Jul 26, 2013 4:32 am

Re: Serviio Stops Working After Computer Restart

DenyAll wrote:You can delay the Serviio service from starting until other components are loaded by making the service dependant on the HTTP service.
To do this, from an elevated command prompt (run cmd.exe as an Administrator) type : sc config Serviio depend= HTTP


I tried it and it indicated "success". However, it did not resolve the problem.
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Fri Jul 26, 2013 6:19 am

Re: Serviio Stops Working After Computer Restart

So you still have to restart the Serviio Service after restarting your PC?
If so, you can set the service to "delayed startup". Start Services.msc, right click on the Serviio service and select properties. Set the startup type to "Automatic (Delayed Startup)" (while in that area, look at the dependencies tab and check that the dependency to HTTP set correctly). Press OK to exit. This will provide about the maximum delay you can without registry trickery.
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

Hubris2

Serviio newbie

Posts: 3

Joined: Wed Nov 21, 2012 4:32 am

Post Mon Aug 19, 2013 6:48 am

Re: Serviio Stops Working After Computer Restart

I also have this problem, and have for every version since 1.1. The server starts without fail, however the server isn't visible by any DLNA device. Stop the Serviio service, restart it, and it is visible and works just fine. This happens every single time the computer is restarted, and setting the Serviio service to a delayed start had no impact - same thing happens.

Any ideas?
<<

DenyAll

DLNA master

Posts: 2257

Joined: Fri Mar 08, 2013 11:16 pm

Location: Adelaide, Australia

Post Mon Aug 19, 2013 7:46 am

Re: Serviio Stops Working After Computer Restart

What version are you using now? What profile?
Set up detailed logging (see zips signature block above), restart your PC, turn on your TVs and see whether Serviio is detected. Post the log to the forum and lets have a look at it.
DenyAll
Panasonic Viera FX800A | Panasonic Viera CS610A | Sony PS4 | Sony PS3 | Panasonic DMP-BD79 | Yamaha RX-V500D | iPad | Windows 10 | Serviio 1.10.1 Pro
WinHelper | MediaInfo

Beta Tester, Moderator
Please do not PM me for support as any solution cannot be shared with others.
<<

Hubris2

Serviio newbie

Posts: 3

Joined: Wed Nov 21, 2012 4:32 am

Post Mon Aug 19, 2013 6:50 pm

Re: Serviio Stops Working After Computer Restart

I updated yesterday from 1.3.0 to 1.3.1, and am using the Panasonic Viera E/S/ST/VT (2011) profile. I'll set up detailed logging and post results back.

Return to Samsung

Who is online

Users browsing this forum: No registered users and 37 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.