Trouble getting serviio to display on C series
6 posts
• Page 1 of 1
I'm not sure what I've done differently or incorrectly and have spent a week trying to track down the error/s. My current setup is this. 2 separate pc's wired to a router. TV is also wired to the router. Both pc's are running identical versions of Win 7 64bit. Serviio shows up on the TV from one PC but not the other. However the one lacking serviio detection shows that computers network on the TV so I know it's connected properly. I was running 1.2 on the computer that is visible and 1.2.1 on the one that wasn't so I removed that and installed 1.2 on the non visible computer but that still didn't help. Any ideas or obvious suggestions where to start my hunt for the problem?
Re: Trouble getting serviio to display on C series
check firewall ports are open, as per the FAQ
Petr
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Re: Trouble getting serviio to display on C series
My firewall is turned off and my Bound IP address is set to the proper Ethernet controller. The TV is listed as active in Serviio.
Re: Trouble getting serviio to display on C series
Do you have any other software potentially blocking the traffic? Like spyware, antivirus, etc
Petr
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Serviio developer / site admin
Do not send me PM for support as the solution can't be shared with others.
Follow Serviio on Facebook | Follow Serviio on Twitter
Help translate Serviio
Intel UPnP tools | HOWTO: Turn on detailed logging | HOWTO: Provide supported formats of a device | HOWTO: Provide details of a video file that doesn't play
Re: Trouble getting serviio to display on C series
No. Currently all I have is the OS, drivers and Serviio installed. I haven't updated all of windows stuff yet. Am I in need of something like .net 4.0 or framework or something along those lines or some other random windows update?
Re: Trouble getting serviio to display on C series
Same as me. Listed here. You might have some success with the options I tried. Or if you figure it out, I also need to know.
viewtopic.php?f=10&t=11154
viewtopic.php?f=10&t=11154
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 21 guests